RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想玩offroad 想問雙星 d車 各型號,邊隻係入門,邊隻係中級 [打印本頁]

作者: raybee1211    時間: 2008-2-28 14:01
標題: 想玩offroad 想問雙星 d車 各型號,邊隻係入門,邊隻係中級
邊隻曼抵貫買??
作者: nickyung    時間: 2008-2-28 14:25
DT02 , DF02 ,DF03 ,DB01 Buggy
作者: go2usie    時間: 2008-2-28 15:05
Tamiya Durga (Belt drive) DB01 la~

Latest model.
作者: 光丑猶仗凡    時間: 2008-2-28 15:12
dt02 2WD $5xx
df03 4WD 行軸 $7xx-8xx
db01 4WD 行皮帶 $9xx-10xx
作者: leeho888    時間: 2008-2-28 18:17
DF03 or DB01 都ok !
作者: raybee1211    時間: 2008-2-28 19:21
電子野之外,有咩要改??? 會唔僧好似ta 05有ms version?? or  r版??改完晒要幾多錢架??
作者: stig    時間: 2008-2-28 20:07
如果想要改哂的,

雙星就TRF501X / TRF501X-WC板(唔知出左未)
http://www.oople.com/rc/photos/review501x/

Associated B44 最新, 岩岩IFMAR off road world cup champion
作者: raybee1211    時間: 2008-2-28 20:28
通常多唔多野壞?df 03行軸 但會唔會好似tt01咩都冇得set ,要比錢改野先有得set? db 01又會唔會似ta05 ???df03同db01 邊架多野set ?邊架pro d?
作者: stig    時間: 2008-2-28 21:40
df03 同 db01係同level車, 分別只係行軸同行皮帶,
如果真係要分 db01 pro 小小小, 真係好小
作者: raybee1211    時間: 2008-2-28 23:04
邊架易維修d??????
作者: sin_324    時間: 2008-2-29 00:45
db01暫時未有太多專用料,
df03就..你肯比錢..咩都有得改

我同朋友一人一架,
佢db01 我df03,
set好唒之後,2架分別真係唔多大,
2部都係好車
作者: GigaRacer    時間: 2008-2-29 01:37
原帖由 sin_324 於 2008-2-28 08:45 發表
db01暫時未有太多專用料,
df03就..你肯比錢..咩都有得改

我同朋友一人一架,
佢db01 我df03,
set好唒之後,2架分別真係唔多大,
2部都係好車


But how much hop-up in your cars?  Which one spent more (car + hop-ups)?  

I think DB01 would be better with same $$.
作者: sin_324    時間: 2008-2-29 04:23
原帖由 GigaRacer 於 2008-2-29 01:37 發表


But how much hop-up in your cars?  Which one spent more (car + hop-ups)?  

I think DB01 would be better with same $$.


改裝上,我同佢分別不大,都只屬小改,
唯一大分別就係我用TAMIYA金屬油壓佢用原裝,
摩打佢宜家用緊無刷10.5R,我用BZ23T,(我買左XBR8.5R未裝)
速度上的確有差別,但操控同行車表現,
經過我地一番SETTING之後,
我同佢都覺得差別極細,都好好跑,
值得一提係限滑對DF03極有幫助,MUST BUY~
作者: raybee1211    時間: 2008-2-29 14:03
小改即係改左幾多錢??咁 db01 df03邊架改完平d?有咩野係一定要改架?
作者: raybee1211    時間: 2008-2-29 14:03
dt 02好似有架ms版,果架又幾多
錢?
作者: stig    時間: 2008-2-29 14:08
9xx 都幾扺玩ga, 不過2wd技術要求高好多, 冇4wd咁易操控
作者: raybee1211    時間: 2008-2-29 14:13
架車而家仲有冇得賣?
作者: raybee1211    時間: 2008-2-29 14:15
好似好正咁 有trf 金屬damper  又有大量options 佢d parts可唔可以放係df03 db01果度用架?,如果可以,仲抵!!
作者: Evo5    時間: 2008-2-29 14:27
I think is better for u to come to TKO off road track this Sunday morning, To check our car out , option parts is not necessary, standard car is ok, the most important is your driving skill

http://bbs.rc-evo.com/viewthread ... page%3D1&page=5
作者: stig    時間: 2008-2-29 14:37
agreed !! option parts is not a must , my df03 with no option part also has great fun !!


                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖

作者: Evo5    時間: 2008-2-29 14:46
But nice camera is a must to take such a photo !
One question ! why your car jumping the opposit direction of the Jump panel ??

[ 本帖最後由 Evo5 於 2008-2-29 14:50 編輯 ]
作者: stig    時間: 2008-2-29 14:58
need to thanks bro explorer XDD
作者: stig    時間: 2008-2-29 15:03
原帖由 Evo5 於 2008-2-29 14:46 發表
But nice camera is a must to take such a photo !
One question ! why your car jumping the opposit direction of the Jump panel ??


the jump panel was like that in early summer, not opposit direction =]
作者: go2usie    時間: 2008-2-29 15:10
標題: 回復 20# 的帖子
really ~ a very nice jumping shoot~~
作者: Evo5    時間: 2008-2-29 15:23
no i mean the jump panel in your photo is jumping to the left , but why your car is jumping to the right ?
u see the slope....highest point is on the left hand side !
so your car should jump to the left but not to the right .

[ 本帖最後由 Evo5 於 2008-2-29 15:25 編輯 ]
作者: stig    時間: 2008-2-29 15:35
原帖由 Evo5 於 2008-2-29 15:23 發表
no i mean the jump panel in your photo is jumping to the left , but why your car is jumping to the right ?
u see the slope....highest point is on the left hand side !
so your car should jump to the  ...


m....
sorry..i cant remember why...haha..
maybe becoz of my bad driving skill, the car wasnt go straight to the jump panel, therefore it looks like jump to the right
作者: sin_324    時間: 2008-2-29 15:57
for fun的話當然咩都冇所謂,
唔改一樣可以fun,
原裝lunch box一樣可以fun過501x

宜家慢慢一樣一樣改,學下set車同d改裝有咩用/點用,
慢慢build up架車,都好fun

樓上nice photos ~
作者: Evo5    時間: 2008-2-29 16:11
HAHA is like your car is Key up hehehee
just kidding !
作者: raybee1211    時間: 2008-2-29 18:07
我都係去tko玩  ,但果度近邊?
作者: raybee1211    時間: 2008-2-29 18:16
光頭tire行住先得唔得架? 會唔會行唔到?仲有,買2wd果架dt02 ms  好定行軸果架4 wd好?
作者: go2usie    時間: 2008-2-29 18:29
DT02MS is almost the same price as DB01, then why not DB01.

DT02MS, u need to buy tire since it doesn't come with.

for durability , DB01 is better then DF03.
i Suggest a DB01 and a 23T motor at the beginning. it is good handling car.

I will use DB01 and TT01-Rally on TKO this Sunday.
There will be a lot of DF and DB as well as the 02MS , u can have a look of might be u can try~
作者: sin_324    時間: 2008-3-1 04:32
原帖由 raybee1211 於 2008-2-29 14:03 發表
小改即係改左幾多錢??咁 db01 df03邊架改完平d?有咩野係一定要改架?



我改左金屬油壓$360(明明寫住df03專用,但前後都要加o-ring改短,激死=   =),
頭萬向$130(好似係)
摩打散熱(唔記得幾錢)
限滑(都唔記得幾錢)
白色彈弓一set(一set有齊軟中硬各一套)(又唔記得幾錢..=  =")

未買xbr8.5r之前係用v16(紅色)電變(好似係$160左右),
星星bz23t $180
servo係bluebird(型號唔記得,好似係$150左右,金屬齒果隻)
控用2pl

ps.原裝db01已經感覺好smooth,操控好好,
我都好同意上面師兄話用db01+23t開始玩起

[ 本帖最後由 sin_324 於 2008-3-1 04:41 編輯 ]
作者: 倒錢落海    時間: 2008-3-1 09:42
原帖由 stig 於 2008-2-29 14:37 發表
agreed !! option parts is not a must , my df03 with no option part also has great fun !!


                               
登錄/註冊後可看大圖
...

呢幅好似就黎撞石咁喎...
作者: stig    時間: 2008-3-1 09:44
原帖由 倒錢落海 於 2008-3-1 09:42 發表

呢幅好似就黎撞石咁喎...


冇錯, 係0.5s之後佢真係撞左石 =.="
作者: Evo5    時間: 2008-3-1 10:03
即係証明炒石.........冇問題
作者: move7648    時間: 2008-3-1 10:39
may i know the different between DB01  / DB03 is only come from different generation, is the option parts or hop-up parts the same??
作者: go2usie    時間: 2008-3-1 10:40
我DB01開始:
LRP AI 電變$5XX (唔記得)
17T bearing摩打(XENON?)$250
KO Servo + 控

後改:
金屬油壓 $300 (寫住df03專用,後要加o-ring改短),
頭單向 $240
限滑 $170
501X Front Arm $38/a pair
作者: go2usie    時間: 2008-3-1 10:43
DF-03 most use spare and option parts only for DF itself.

DB01 can use most of the 501X parts , and those specify parts  for DB.
DB01 's performance is the most close to the highest grade buggy 501X then any other Tamiya buggy.
作者: go2usie    時間: 2008-3-1 10:45
標題: 回復 38# 的帖子
about is just my own opinion.

bros lets discuss and share yours experiences, opinions or modifications.
作者: stig    時間: 2008-3-1 10:50
does DF03 get better balance than DB01 becoz of the central battery design ?
i have never seen a DB01 runs be4 so i have no idea how it is..
作者: 倒錢落海    時間: 2008-3-1 10:55
原帖由 stig 於 2008-3-1 10:50 發表
does DF03 get better balance than DB01 becoz of the central battery design ?
i have never seen a DB01 runs be4 so i have no idea how it is..

我朋友玩 db01. 我玩 df03. 尋晚兩條麻甩佬係沙灘放車仔. 大家都係原裝車. 感覺上 df03 易控制的. 另外係 db01 好易深陷於沙中無法動彈...=.= 反而我部 df03 由頭跑到尾冇呢個問題.

另外我同意 df03 重心設計好過 db01.
作者: stig    時間: 2008-3-1 10:55
but the bad design of heat sink is the main problem of DF-03, the motor over heat easily
作者: 倒錢落海    時間: 2008-3-1 10:59
原帖由 stig 於 2008-3-1 10:55 發表
but the bad design of heat sink is the main problem of DF-03, the motor over heat easily

係...=.= 裝摩打果個位窄到乜咁...=.=

另外係殼既問題. 我用 avante mk2 殼. 內部空間十分狹小. 好辛苦先至塞得晒的野入去...=.=
作者: stig    時間: 2008-3-1 11:05
i think every buggy have the same problem, its a disaster to tell me fix everything into my KEEN HAWK too, i even  need to move the esc fan to a not very effective position. haha
作者: stig    時間: 2008-3-1 11:11
for raybee1211, quite useful =]

DF03 :
http://www.oople.com/rc/photos/reviewkeenhawk/

DB01:
http://www.oople.com/rc/photos/reviewtamiyadurga/
作者: 倒錢落海    時間: 2008-3-1 11:14
原帖由 stig 於 2008-3-1 11:05 發表
i think every buggy have the same problem, its a disaster to tell me fix everything into my KEEN HAWK too, i even  need to move the esc fan to a not very effective position. haha

db01 內部空間好似大的. df03 個底兜實在太纖巧. 另外我發覺我係冇位裝 esc fan...=.= 而家的電子野連電線已經頂晒殼咁滯.
作者: move7648    時間: 2008-3-1 12:22
for my view
shaft drive may get more power than belt drive, isn't it ture??

as all my touring car is 4wd, i would rather pick DT02 as well, seems all bro comments 2wd is hard to handling...
作者: Evo5    時間: 2008-3-1 12:35
I dont have heat problem on both car !
DB01 motor is fully enclosed inside the shell, should have more heat problem then DF03
Atlease some moving air can blow to the DF motor.

Both car are stable and smooth, but DF is much lighter, The reason the DB stuck to the sand is because wider chassis, where DF have a thin chassis ! Both car are good so I have both !
作者: sin_324    時間: 2008-3-1 13:51
再嚟放毒~

db01@tko影片
http://bbs.rc-evo.com/viewthread.php?tid=68905&highlight=db01

買啦買啦~buggy好好玩架~
作者: 倒錢落海    時間: 2008-3-1 13:56
原帖由 sin_324 於 2008-3-1 13:51 發表
再嚟放毒~

db01@tko影片
http://bbs.rc-evo.com/viewthread.php?tid=68905&highlight=db01

買啦買啦~buggy好好玩架~

df03 @ 南灣
http://hk.youtube.com/watch?v=68ZYnMudjH4
作者: raybee1211    時間: 2008-3-1 14:33
如果玩玩下d電線斷左即時點攪?我d摩扛同esc係直駁,好易斷 大家有咩方法解決?? thx
作者: ryancmlam    時間: 2008-3-1 23:14
原帖由 Evo5 於 2008-2-29 15:23 發表
no i mean the jump panel in your photo is jumping to the left , but why your car is jumping to the right ?
u see the slope....highest point is on the left hand side !
so your car should jump to the  ...


It was because the jump panel was in V shape at that time. i.e. could jump from L to R or vice versa.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2