RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: MIP 4x400 [打印本頁]

作者: Sps 時間: 2008-3-2 16:18
標題: MIP 4x400
any brother had installed this item before??

MIP 4x400 conversion kit for the tamiya sand scorcher and other SRB chassis kits.

can also be used to convert a vintage rc-10 to 4wd

[attach]147024[/attach]

[ 本帖最後由 Sps 於 2008-5-19 12:58 編輯 ]

作者: aattaa 時間: 2008-3-2 21:53
呢一袋零件值成US$800!!!!

吾通係經典中的經典??

作者: tiger1 時間: 2008-3-2 23:01
This is an expensive rubbish. The steering is sloppy and the front dogbones were steel wires only. The flexible cable was horrible. MIP eventually took the smarter way: use chain.

作者: minimini 時間: 2008-3-3 00:00
a perfect shelf queen.......

作者: jpmontoya2 時間: 2008-3-3 00:04
tho i have not heard of this product b4 (unless someone gave me a call)

but with bidding so aggressively given that there are still 2 days to go....this item must worth a mountain!!!!

作者: minimini 時間: 2008-3-3 00:16

原帖由 tiger1 於 2008-3-2 23:01 發表

 登錄/註冊後可看大圖

This is an expensive rubbish. The steering is sloppy and the front dogbones were steel wires only. The flexible cable was horrible. MIP eventually took the smarter way: use chain.

unfortunately I don't have it.......otherwise.......發達啦 !!........

作者: Sps 時間: 2008-3-3 14:03

原帖由 tiger1 於 2008-3-2 23:01 發表

 登錄/註冊後可看大圖

This is an expensive rubbish. The steering is sloppy and the front dogbones were steel wires only. The flexible cable was horrible. MIP eventually took the smarter way: use chain.

你都唔好話係rubbish
仲有一日都已經過千
唔係好野點會甘多人要

作者: fat_fat_cat 時間: 2008-3-3 17:53
I think there is no choice.....

I also want  to make a 4WD sand scorcher, but no money for the kit.
actually you still can found new kit in US hobby store, but most over USD$1K

any idea if we can join together and make our own version?  I think most people still like it will over 36+, should get more knowledge and technology to built better than those.

I know bros here had make suspe. arms and gear.  Any one interesting??

I see one in germany, the guy drill a hole in the gear box, extend one gear shaft join a flex shaft to the front, a small belt gear box in the front with some dog bones and custom steering hubs, work great.

Most important is the car still is a strong and maintaince free buggy, with water resistance servo and speed control, they just play, water wash, play, water wash..........................

So bad no cam when see it

作者: Sps 時間: 2008-3-3 18:11

原帖由 fat_fat_cat 於 2008-3-3 17:53 發表

 登錄/註冊後可看大圖

I think there is no choice.....
I also want to make a 4WD sand scorcher, but no money for the kit.
actually you still can found new kit in US hobby store, but most over USD$1K

any idea if we ...

This is good idea

If anything can go further ,please think about and let me know.

作者: tiger1 時間: 2008-3-3 20:27

原帖由 fat_fat_cat 於 2008-3-3 17:53 發表

 登錄/註冊後可看大圖

I think there is no choice.....
I also want to make a 4WD sand scorcher, but no money for the kit.
actually you still can found new kit in US hobby store, but most over USD$1K
I see one in germany, the guy drill a hole in the gear box, extend one gear shaft join a flex shaft to the front, a small belt gear box in the front with some dog bones and custom steering hubs, work great.
any idea if we ...

Do you have a linkof that German SRB?

Yes, I do think getting a self made conversion kit is not impossible. PM me.

作者: fat_fat_cat 時間: 2008-3-3 20:39
not from internet, 03 in hamburg myself, and man age around 45 make it, get a deep memory as he wash the car after playing, which I like rough rider in the beginning

作者: tiger1 時間: 2008-3-4 00:09
I think we can try to us small cars front steering knuckles, e.g. rc18

作者: fat_fat_cat 時間: 2008-3-4 00:14
will that strong enough???? my final goal is a rough rider happy for sunday drive and no need maintaince, just water wash..heeee

作者: tiger1 時間: 2008-3-4 00:15
I think that will be strong enough.

作者: fat_fat_cat 時間: 2008-3-4 00:25
very interesting...

gearbox too?

作者: tiger1 時間: 2008-3-4 00:32
Gearbox keep it simple, just chain drive and sprockets.

作者: fat_fat_cat 時間: 2008-3-4 01:03
but will rough rider chassic good for a chain on it??
will flexshaft or belt also possible?

作者: tiger1 時間: 2008-3-4 01:06
chain is more adjustable in length. Belt is harder to come by in correct length. Flexshaft is a power robber, the worst.SRB chassis should be OK.

The question is, which front steering knuckle fits better: 18 son or mini-inferno?

作者: fat_fat_cat 時間: 2008-3-4 01:36
don't know any idea about 2, will go out see see first

作者: fat_fat_cat 時間: 2008-3-5 16:07
woooooo final is 1225.....

sorry bros, still no time to see the gear box....

作者: tiger1 時間: 2008-3-5 17:31

原帖由 fat_fat_cat 於 2008-3-5 16:07 發表

 登錄/註冊後可看大圖

woooooo final is 1225.....
sorry bros, still no time to see the gear box....

This is called irrationality.

作者: fat_fat_cat 時間: 2008-3-5 17:54
I called it CRAZY

Should we design a 4wd kit and sell on ebay...... make some money??

作者: tiger1 時間: 2008-3-5 20:20

原帖由 fat_fat_cat 於 2008-3-5 17:54 發表

 登錄/註冊後可看大圖

I called it CRAZY

Should we design a 4wd kit and sell on ebay...... make some money??

yes.

作者: fat_fat_cat 時間: 2008-3-5 21:05
better don't use 1/18 parts then.... price higher higher!!!

作者: minimini 時間: 2008-3-5 21:08

原帖由 fat_fat_cat 於 2008-3-5 21:05 發表

 登錄/註冊後可看大圖

better don't use 1/18 parts then.... price higher higher!!!

can think think using the B4 parts.....品質有保証.....

作者: tiger1 時間: 2008-3-5 22:26
1/10 steering knuckles are too tall, the SRB knuckles are very short....

作者: fat_fat_cat 時間: 2008-3-5 23:06
custome made??

作者: tiger1 時間: 2008-3-6 08:22

原帖由 fat_fat_cat 於 2008-3-5 23:06 發表

 登錄/註冊後可看大圖

custome made??

May be have to..... as long as it is affordable.

作者: fat_fat_cat 時間: 2008-3-6 08:47
those guys pay over 1000+ for that..... sure affordable..

作者: Sps 時間: 2008-5-19 12:57
http://bbs.rc-evo.com/forumdisplay.php?fid=91&page=1

作者: matchbox 時間: 2008-5-19 16:27
有Bros 曾post 過
http://bbs.rc-evo.com/viewthread.php?tid=2996&highlight=mip

係唔係這套kits?

[ 本帖最後由 matchbox 於 2008-5-19 17:01 編輯 ]

作者: Sps 時間: 2008-5-19 16:35

原帖由 matchbox 於 2008-5-19 16:27 發表

 登錄/註冊後可看大圖

有Bros 曾post 過
http://bbs.rc-evo.com/viewthread.php?tid=2996&highlight=mip

條唔係這套kits?

Yes

You know this brother?
佢果架車係全球既rc來講可以算得上是最強同最罕有

作者: matchbox 時間: 2008-5-19 17:17
so cool ~~

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)