CIMG2696a.jpg (26.65 KB, 下載次數: 2)
2008-3-12 23:17 上傳
CIMG2698a.jpg (27.97 KB, 下載次數: 2)
2008-3-12 23:17 上傳
harness.jpg (32.56 KB, 下載次數: 0)
2008-3-12 23:17 上傳
harness.jpg (50.46 KB, 下載次數: 0)
2008-3-12 23:20 上傳
[ 本帖最後由 gtimax 於 2008-3-12 23:20 編輯 ]
作者: 馮馮ymc 時間: 2008-3-12 23:42
有咩討論呀???係你唔知搾
作者: 馮馮ymc 時間: 2008-3-12 23:43
佢又大陸電....人地又大陸電.....人地方便好多囉
作者: gtimax 時間: 2008-3-12 23:46
my friend want to know how to connect with orion.
作者: penny..t.o.p. 時間: 2008-3-12 23:48
是我唔知搾......他是POST給我看的.....THX!!!
作者: 馮馮ymc 時間: 2008-3-12 23:49
作者: 馮馮ymc 時間: 2008-3-12 23:51
下個月等我d大6电介吓你d洋葱电先
作者: penny..t.o.p. 時間: 2008-3-12 23:56
唔好話介.......大家交流下.....給我一個學習機會
作者: penny..t.o.p. 時間: 2008-3-12 23:58
呀馮......我的新义機
作者: penny..t.o.p. 時間: 2008-3-13 00:02
可同一時間.....用一個义機.....兩個Blancer义兩排電
作者: apky2003 時間: 2008-3-13 00:28
C Hng, how much that you buy that 1210i + LBA10 Balancer !?
作者: ttyy 時間: 2008-3-13 00:39
so good? how much for everything? pls post pics with everything setup pls for reference
作者: penny..t.o.p. 時間: 2008-3-13 00:40
义機加兩個 Balancer.......$1800........我朋友幫我訂的......不是香港買的
作者: penny..t.o.p. 時間: 2008-3-13 00:41
原帖由 ttyy 於 2008-3-13 00:39 發表
so good? how much for everything? pls post pics with everything setup pls for reference
我下星期才有時間TRY 呀.........
作者: gtimax 時間: 2008-3-13 00:48
including the temp senor and adapter, the price is very good.
you know hk shop will sell those sensor and adapter for very high price.
作者: kawada 時間: 2008-3-13 00:50
I use this combo, tailor made for Orion Lipos. With battery plugs to equalize and balance orion cells. BTW.. this balancer claimed to be workable on all lipo chargers
[ 本帖最後由 kawada 於 2008-3-13 00:54 編輯 ]
作者: looseman 時間: 2008-3-13 07:20
ah 8.365v???
when using balancer....output should be not more than 4.2v cut off@1A (1c)
the charging rate for each cell is low 3~4.2v max @ 1A is recommended's charging rate(1C) for most lipo batteries
maybe I'm wrong because I'm using different 1-6 cells balancer(Equinox)
if I'm right, you are making a little bomb at home!
[ 本帖最後由 looseman 於 2008-3-13 10:11 編輯 ]
作者: Chrispo 時間: 2008-3-13 08:19
8.365v for 2 lipo cells, i.e. ~4.18V per lipo cell, still hasn't reached the upper limit yet and the charging current shown in the display is 0.51A which is pretty small. Please correct me if I'm wrong.
作者: looseman 時間: 2008-3-13 09:47
原帖由 Chrispo 於 2008-3-13 08:19 發表
8.365v for 2 lipo cells, i.e. ~4.18V per lipo cell, still hasn't reached the upper limit yet and the charging current shown in the display is 0.51A which is pretty small. Please correct me if I'm wron ...
I'm using ICE charger with Equinox balancer
ICE output is 4.2v@1A, to balancer, I usually charge 3S 20c/25c at this setting, if I set 3x4.2v(12.6v) output which is overed V 3 times.
each cell get 4.15v~4.18v when balanced and fully charged, the combined V is about 12v + / - 5%, checked by digital mulitimeter that means I'm right.
these pictures showed above are ICE and Equinox cloned which I guess the setting should be same as mine. what I'm worry about output at 8v for 2S maybe wrong because the balancer is getting 8v to each cell, not 4.2v, I might getting wrong, their looking are almost same to mine, but they are different models that maybe the balancer can convert 8v to 4.2v for each cell.
PS: No matter it charges 1S or 6S, the charger's output is 4.2v max to balancer. if charge 6S at 4.2v x 6 =25v...that doesn't make sense for me.
[ 本帖最後由 looseman 於 2008-3-13 10:01 編輯 ]
作者: kawada 時間: 2008-3-13 10:07
原帖由 looseman 於 2008-3-13 07:20 發表
ah 8.365v???
when using balancer....input should be 4.2v cut off@1A (1c)
the charging rate for each cell is low 3~4.2v max @ 1A is recommended's charging rate(1C) for most lipo batteries
maybe I'm ...
It should be the output voltage of the Orion Lipo, but not charging current ( dont kidding me ) I believe charging voltage is not adjustable other than current, which 1C is the max. Make it simple, here is the example
Battery Capacity = 4800A, where 1C = 4.8A as the Max charging current
作者: kawada 時間: 2008-3-13 10:15
原帖由 looseman 於 2008-3-13 09:47 發表
I'm using ICE charger with Equinox balancer
ICE output is 4.2v@1A, to balancer, I usually charge 3S 20c/25c at this setting, if I set 3x4.2v(12.6v) output which is overed V 3 times.
each cell ge ...
This is the upgrade version of ICE where the voltage indicator will automatically display whatever the source provided. Regarding to S & Cs. all you need is to tell the charger how many cells you are charging and button pushing on the balancer for auto detection; then everything is done by the charging combo.
作者: gtimax 時間: 2008-3-13 23:25
原帖由 gtimax 於 2008-3-12 23:17 發表
見圖blancer 插 用2CELL
紅接紅--電池(+), 黑接黑--電池(-), 中間的黑色接小小插
150051150052150053150056
it is the point that I always worry about the combo set check point.
we will never know the working data about the balancer, how can I know it is work ok? how good is my lipo?
for latest fight charger and balancer , the data all can be read.
it is the reason that me and Penny choose Hyperion, it has a data port for balancer and read all time and it is reasonable price.
charger $3?? balancer $3?? it is A123 compatible!
作者: penny..t.o.p. 時間: 2008-3-14 00:18
原帖由 gtimax 於 2008-3-13 23:25 發表
it is the point that I always worry about the combo set check point.
we will never know the working data about the balancer, how can I know it is work ok? how good is my lipo?
for latest fight c ...
Charger $11XX ar.............
作者: mschumi 時間: 2008-3-16 18:49
原帖由 Chrispo 於 2008-3-13 08:19 發表
8.365v for 2 lipo cells, i.e. ~4.18V per lipo cell, still hasn't reached the upper limit yet and the charging current shown in the display is 0.51A which is pretty small. Please correct me if I'm wron ...
Hi Friend 請問如果 我 用 trakpower balancer,俄 我可否用 Checkpoint TC 1030 機 ?
作者: ben3210 時間: 2008-3-16 23:27
師兄點解你唔選擇呢部呀EOS 0610i US$169.9 約HK$1300左右, 內置己有平衡器,1210i响香港可以買到KWS, 我心水係0610i NET但香港我暫時未見到如有請通知小弟
如再有錢0610i DUO仲正呀一次义得仲多
0610i NET 6S 10A 250W
0610i DUO 12S 10A 360W
作者: penny..t.o.p. 時間: 2008-3-17 00:20
原帖由 ben3210 於 2008-3-16 23:27 發表
師兄點解你唔選擇呢部呀EOS 0610i US$169.9 約HK$1300左右, 內置己有平衡器,1210i响香港可以買到KWS, 我心水係0610i NET但香港我暫時未見到如有請通知小弟
如再有錢0610i DUO仲正呀一次义得仲多
...
因為我覺得如果壞咗.........都知道什麼壞
....其實係我自己鐘意1210i......其實玩車自己鍾意用什麼就用什麼......這才會玩得開心......你話係唔係C兄 作者: looseman 時間: 2008-3-17 06:46
原帖由 kawada 於 2008-3-13 10:15 發表
This is the upgrade version of ICE where the voltage indicator will automatically display whatever the source provided. Regarding to S & Cs. all you need is to tell the charger how many cells you ar ...
ICE or this TC, they might be from the same factory, but labeled in different brands' OEM with other setting on the same looking case, little more output and higher discharging rate that is improvements with much cheaper price that is great.
with ICE, It needs to set how many cell/max v & temp. cut off/A output. normally 11.1v 25C 3S 2500mah, 4.2v 2.5A, or 11.1v 3S 1100mah@ 4.2v/1A~1.1A, I love manual setup than any automatic which automatic makes me feel unsafe all the time. I tried on many different chargers in the automatic mode...they often overcharges or not always actual fully charged the battery, the battery is very hot when fully charged, I usually manual setup which is the batter way than use automatic. These batteries only got little warm after fully charged. When you check the linear graph on the display during charging the battery, you will know what is actually going for the battery, and then you can modify to the right setting for each different types of battery. <-- this is for NiMh, for Lipo..they won't get warm or hot after fully charged with the right charge setting.
[ 本帖最後由 looseman 於 2008-3-17 07:12 編輯 ]
作者: lichungkiu 時間: 2008-3-17 08:47
請問係咪普通叉nicd既叉機加左個lipo balancer 就可以叉lipo嫁啦??
作者: loman 時間: 2008-3-17 09:58
dont kidding la
作者: penny..t.o.p. 時間: 2008-3-17 10:06
如果可以........我就唔使買過义機啦
作者: SnackEater 時間: 2008-4-6 18:02
注意其實你唔需要兩個balancer，一個balancer都可以充到6 cell，即係三排2 cell
另一樣要注意係你如果想同時充超過一排電，每排電都要相同(牌子，model，mah...)，重要接近用量，例如如果你放一排玩完同一排剛充滿嘅電一齊充，你準備定滅火桶都得喇，因為個balancer只會好慢咁將高電壓個幾cell放電，並唔會將充滿嗰排電停充，
作者: gtimax 時間: 2008-4-6 22:07
是得但超超慢。。。。
作者: jim2005 時間: 2008-4-7 22:11
係香港边道買HYPERION 义機平呢? HYPERION 义机係味要自已買測温線架? 如要幾$ ?
HYPERION好定estation 好D 呢? thx
[ 本帖最後由 jim2005 於 2008-4-7 22:31 編輯 ]
作者: SnackEater 時間: 2008-4-7 23:03
Hyperion 1210i，網上近排見有二手出售，八舊
測溫線另外購買，充lipo無用，無買過唔知幾錢
我有Hyperion 1210i 同 e-STATION BC5，level唔同難以比較，我會揀Hyperion，再買我會考慮MegaPower 960SR
作者: jim2005 時間: 2008-4-7 23:13
THX SnackEater
有Hyperion 1210i 同 e-STATION BC5 都仲想買MegaPower 960SR,
MegaPower 960SR 邊道做同有咩好呢?
我見KWS 飛機那間有MegaPower買, 但價$ 都唔比Hyperion 平
作者: SnackEater 時間: 2008-4-7 23:30
我意思係再揀的話會考慮MegaPower
960SR性能規格上同1210差唔多，但功能MegaPower多少少，邊隻好就真係要試過先知
| 歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |