標題: Apex Cubic電變唔好用! [打印本頁] 作者: lunnchaz 時間: 2008-3-28 16:45 標題: Apex Cubic電變唔好用! 之前post過我架車電變死左~~
結果今日問左個fd借左個Apex Cubic試下~~
點知原來Apex Cubic個後波唔係好work~~
佢好似接收得好慢反應好慢~~好差
我問朋友買左幾錢??重要成470蚊~~
不過冇計啦自己冇錢買電變~要用住先~~作者: _森_ 時間: 2008-3-28 17:09
有D電變係甘-後波反應慢原因.想保護馬達!!作者: jacobchu2007 時間: 2008-3-28 17:24
The reverse will only be used in emergency. If the reverse mode is too qiock, then motor bruish and copper head will be burnt and tne motor need to be replaced very quickly. Many ESC, including LRP, Futaba also have these setup.作者: lunnchaz 時間: 2008-3-28 17:26
哦原來係咁..但係我見mc330好快作者: Pianist 時間: 2008-3-28 19:02
係咪無睇說明書.
有兩秒係ABS . 兩秒之後唔放手就FULL 後波
向前行緊 或 ABS 之後放一放中位先
再拉後就即後波.作者: lunnchaz 時間: 2008-3-28 21:30
哦~謝謝呀~~
因為係問人地借
所以唔係好知呀
