RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Hilux+CR01 [打印本頁]

作者: hihizaza 時間: 2008-4-19 16:54
標題: Hilux+CR01
my hilux fit with CR-01 tire.
it is perfect,need to order one more set!!

[ 本帖最後由 hihizaza 於 2008-10-6 12:55 編輯 ]

作者: StarBuck 時間: 2008-4-19 17:01
ONLY買呔呤幾錢?

作者: minimini 時間: 2008-4-19 17:05
looks far more proportional.......

作者: stig 時間: 2008-4-19 17:06
its perfect !!!
how much is the tyre + rim ?

作者: hihizaza 時間: 2008-4-19 17:08
i think about 300-400,total6200yen

作者: stig 時間: 2008-4-19 17:10
not bad , some of the rims for hilux cost more than 6xx in KWS....

作者: hihizaza 時間: 2008-4-19 17:15

原帖由 stig 於 2008-4-19 17:10 發表

 登錄/註冊後可看大圖

not bad , some of the rims for hilux cost more than 6xx in KWS....

yes,this one is cheaper and better!!

作者: cHRisTiAN 時間: 2008-4-19 17:24
wa........真係靚仔.
咁改會唔會好爬左?

作者: hihizaza 時間: 2008-4-19 17:28
just try put it on hilux,not yet play!!

作者: minimini 時間: 2008-4-19 17:47

原帖由 stig 於 2008-4-19 17:10 發表

 登錄/註冊後可看大圖

not bad , some of the rims for hilux cost more than 6xx in KWS....

also these tyres are "original Tamiya" ma.......

作者: txzmxn 時間: 2008-4-19 18:01
looks good!! Much better than original

作者: jas 時間: 2008-4-19 19:02
Do you need to change the axles to longer ones ma?

作者: hihizaza 時間: 2008-4-19 19:33
no need ar!!

i will add a 1mm spacer between the wheel and hexagon!!

[ 本帖最後由 hihizaza 於 2008-4-19 19:35 編輯 ]

作者: go2usie 時間: 2008-4-19 19:35
唔昇高車殼........玩起上黎會"cake"硬沙板~~

作者: hihizaza 時間: 2008-4-19 19:44
just display is no problem,i don't is it cake沙板when playing!!!

作者: jas 時間: 2008-4-20 16:21

原帖由 hihizaza 於 2008-4-19 19:33 發表

 登錄/註冊後可看大圖

no need ar!!
i will add a 1mm spacer between the wheel and hexagon!!

Huh? If you add a spacer, then that makes the axle even shorter wor?
I was wondering if the axle is long enough for the 2.2 wheels.

作者: hihizaza 時間: 2008-4-21 15:34
Hello jas,some photo for your reference!!

it will not touch the edge of ball jont & screw head!!

[ 本帖最後由 hihizaza 於 2008-4-21 15:36 編輯 ]

作者: 有勇冇謀 時間: 2008-4-21 15:40
ONLY DISPLAY ONLY....

落地一定 "cake" 殼....

作者: hihizaza 時間: 2008-4-21 15:45
i will 昇高車殼 5-10mm,is it enough??

作者: nemo 時間: 2008-4-21 18:05
Would the front tyre touch the side bar with full turn? I have this problem with Proline 2.2 wheel and tyre.

作者: 倒錢落海 時間: 2008-4-21 18:22
呢四條呔/鈴 ok 喎. 請問邊間舖有現貨?

作者: hihizaza 時間: 2008-4-21 18:30
i bought CR-01 already,and try to fit with Hilux only,
i think we need to order in waigo
part no.51323x2,51324x2,50573x8

作者: 倒錢落海 時間: 2008-4-21 22:33

原帖由 hihizaza 於 2008-4-21 18:30 發表

 登錄/註冊後可看大圖

i bought CR-01 already,and try to fit with Hilux only,
i think we need to order in waigo
part no.51323x2,51324x2,50573x8

thanks^^

作者: cHRisTiAN 時間: 2008-4-21 23:49

原帖由 倒錢落海 於 2008-4-21 22:33 發表

 登錄/註冊後可看大圖

thanks^^

鈴-------今日行過kws已經有得賣.
但呔就唔多覺.

作者: jas 時間: 2008-4-22 20:31
50573x8 ?
Are the screws not included with the wheels?

作者: hihizaza 時間: 2008-4-22 21:50
i think it is separate,because it has not write include in manual!!

作者: ll2002 時間: 2008-4-23 01:21
I just buy the CR01 鈴&呔 already in KWS!! 1700Yen for 呔 x2 1000Yen for 鈴 x2 Total 5400Yen!! HK$3xx

作者: go2usie 時間: 2008-4-23 01:25
呤圈銀色的parts 是金屬制品嗎?

作者: hihizaza 時間: 2008-4-23 09:28

原帖由 ll2002 於 2008-4-23 01:21 發表

 登錄/註冊後可看大圖

I just buy the CR01 鈴&呔 already in KWS!! 1700Yen for 呔 x2 1000Yen for 鈴 x2 Total 5400Yen!! HK$3xx

how about the screw set??is it include??

作者: hihizaza 時間: 2008-4-23 09:28

原帖由 go2usie 於 2008-4-23 01:25 發表

 登錄/註冊後可看大圖

呤圈銀色的parts 是金屬制品嗎?

it is plastic in kit set!!

作者: ll2002 時間: 2008-4-23 13:58
標題: 回復 29# 的帖子
screws is included!

作者: hihizaza 時間: 2008-4-23 22:07

原帖由 ll2002 於 2008-4-23 01:21 發表

 登錄/註冊後可看大圖

I just buy the CR01 鈴&呔 already in KWS!! 1700Yen for 呔 x2 1000Yen for 鈴 x2 Total 5400Yen!! HK$3xx

i bought it too $3XX

作者: edison 時間: 2008-4-23 22:30

原帖由 hihizaza 於 2008-4-23 22:07 發表

 登錄/註冊後可看大圖

i bought it too $3XX

Which shop man?

作者: hihizaza 時間: 2008-4-23 22:54
i don't know the name,it is near 萬lee!!

作者: combatfung 時間: 2008-5-1 02:25

原帖由 ll2002 於 2008-4-23 01:21 發表

 登錄/註冊後可看大圖

I just buy the CR01 鈴&呔 already in KWS!! 1700Yen for 呔 x2 1000Yen for 鈴 x2 Total 5400Yen!! HK$3xx

which shop at KWS ??? thx !

作者: hihizaza 時間: 2008-5-1 03:06
車中X,今日都見到有貨!!

作者: 艷男通渠佬 時間: 2008-5-1 03:24
Hilux+CR01 架車好靚仔

作者: combatfung 時間: 2008-5-24 20:17
I bought one set from active hobby , below $300, and it is very nice after install in my hilux!!!

[ 本帖最後由 combatfung 於 2008-5-27 03:27 編輯 ]

作者: hihizaza 時間: 2008-5-24 23:33

原帖由 combatfung 於 2008-5-24 20:17 發表

 登錄/註冊後可看大圖

I bought one set from action hobby , below $300, and it is very nice after install in my hilux!!!

also not easy to (cup)!!

作者: combatfung 時間: 2008-5-27 03:26
i use the other alu bone cup , it extend 5mm , it is very nice used this tire and rim

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)