RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: DB01齒比測試 [打印本頁]

作者: shouldbe 時間: 2008-4-22 01:22
標題: DB01齒比測試
今晚開工,明天試車

手上有Pinion Gear 16t,17t,23t
Center Bulk Pulley Gear 16t,17t,18t
應該點配好呢,有冇手足有意見?

[attach]159453[/attach]

作者: go2usie 時間: 2008-4-22 01:27
wow ..... 3 more new lipo ...... 好多錢呀 shouldbe ~~~

好羨慕~~

作者: shouldbe 時間: 2008-4-22 01:31

原帖由 go2usie 於 2008-4-22 01:27 發表

 登錄/註冊後可看大圖

wow ..... 3 more new lipo ...... 好多錢呀 shouldbe ~~~ 好羨慕~~

no no no,扮嘢炸,得一排係新買的,為星期日的TKO而買的

作者: minimini 時間: 2008-4-22 01:31
I will advise to try try the smallest gear ration first..........ie......... 16T pinion........plus 16T pulley...........to see any overheating or not........& of course .........the speed la.......

作者: shouldbe 時間: 2008-4-22 01:34

原帖由 minimini 於 2008-4-22 01:31 發表

 登錄/註冊後可看大圖

I will advise to try try the smallest gear ration first..........ie......... 16T pinion........plus 16T pulley...........to see any overheating or not........& of course .........the speed la.......

有道理

.
又要問車友借測溫鎗啦,即刻開工

,不過好想瞓呀

作者: man2008 時間: 2008-4-22 07:14
I use 16t gear for 5.5R.
sound loudly.

作者: quakequake 時間: 2008-4-22 08:08

原帖由 man2008 於 2008-4-22 07:14 發表

 登錄/註冊後可看大圖

I use 16t gear for 5.5R.
sound loudly.

我用 17T齒，6.5R，我都係好嘈呀，係咪set 錯野呀？

作者: Patrick6 時間: 2008-4-22 08:48
其實我都想開post 問換麼打齒問題, 現正好借shouldbe 兄的post 問下討論下

我架低B-01 用緊GTB 8.5R 無刷system跟原裝17t麼打齒, 玩完一排電度下電變麼打溫度, 都係得三十幾四十度, 所以相信可以用大D 麼打齒, 咁我咪買左雙星的18t & 19t 麼打齒, 點知裝左19t落架車度, 就好似掃齒咁好大聲, 最終都係用翻原裝17t.

咁想請教下各位, DB-01 所用的齒是否跟一般雙星車的齒pitch 有所不同呢?

[ 本帖最後由 Patrick6 於 2008-4-22 09:10 編輯 ]

作者: quakequake 時間: 2008-4-22 09:57
噤問一句大家，"好嘈" 係咪等於 "掃齒" ?

作者: RogerFederer 時間: 2008-4-22 10:35
好嘈可能係齒距太近, 個pitch可能唔岩,
孖星車成日都出埋d專用pitch, df03都有專用牙, 唔知db01有無..

作者: quakequake 時間: 2008-4-22 11:07

原帖由 RogerFederer 於 2008-4-22 10:35 發表

 登錄/註冊後可看大圖

好嘈可能係齒距太近, 個pitch可能唔岩,
孖星車成日都出埋d專用pitch, df03都有專用牙, 唔知db01有無..

請問齒距太近係指真正距離放得太近定係齒輪數目太近？

作者: smallfaifai 時間: 2008-4-22 11:17

原帖由 Patrick6 於 2008-4-22 08:48 發表

 登錄/註冊後可看大圖

其實我都想開post 問換麼打齒問題, 現正好借shouldbe 兄的post 問下討論下

我架低B-01 用緊GTB 8.5R 無刷system跟原裝17t麼打齒, 玩完一排電度下電變麼打溫度, 都係得三十幾四十度, 所以相信可以用大D 麼打齒, ...

係唔同o架，佢o個隻係0.5pitch，只係同TRF501X共通……

作者: RogerFederer 時間: 2008-4-22 11:26

原帖由 quakequake 於 2008-4-22 11:07 發表

 登錄/註冊後可看大圖

請問齒距太近係指真正距離放得太近定係齒輪數目太近？

齒間距離

即係前者

作者: man2008 時間: 2008-4-22 11:28

原帖由 Patrick6 於 2008-4-22 08:48 發表

 登錄/註冊後可看大圖

其實我都想開post 問換麼打齒問題, 現正好借shouldbe 兄的post 問下討論下

我架低B-01 用緊GTB 8.5R 無刷system跟原裝17t麼打齒, 玩完一排電度下電變麼打溫度, 都係得三十幾四十度, 所以相信可以用大D 麼打齒, ...

我之前用8.5R + 21t gear
正常

作者: man2008 時間: 2008-4-22 12:33

原帖由 Patrick6 於 2008-4-22 08:48 發表

 登錄/註冊後可看大圖

其實我都想開post 問換麼打齒問題, 現正好借shouldbe 兄的post 問下討論下

我架低B-01 用緊GTB 8.5R 無刷system跟原裝17t麼打齒, 玩完一排電度下電變麼打溫度, 都係得三十幾四十度, 所以相信可以用大D 麼打齒, ...

Are you use the 48 pitch gear??

作者: Evo5 時間: 2008-4-22 12:42
No ...DB01 is different to DF03
DF03 use 05
DB use 48

作者: syip89 時間: 2008-4-22 12:44
I also use Novak GTB 8.5R, with 48 pitch 20t pinion gear. temperature is OK. it was loub when I first install it. But after some adjustment the noise is acceptable.

作者: quakequake 時間: 2008-4-22 12:45

原帖由 syip89 於 2008-4-22 12:44 發表

 登錄/註冊後可看大圖

I also use Novak GTB 8.5R, with 48 pitch 20t pinion gear. temperature is OK. it was loub when I first install it. But after some adjustment the noise is acceptable.

噤你做左咩 adjustment 呀？

作者: man2008 時間: 2008-4-22 12:48
Sure ....
DB is 48p

作者: man2008 時間: 2008-4-22 12:57
嘈....
可能係因為由頭至尾均為密封式齒箱, 好似玩音響咁造成boom effect聲頻共震效果.
我拆開過睇, 又無滑牙喎.

作者: syip89 時間: 2008-4-22 13:02
the adjustment I made was to reduce the clearance between the pinion gear and spur gear.

the pinion gear used should be 48 pitch. If you check the stock 17t and 23t pinion gear, use can use "48" printed on the side. anyway, I am tempted to put in a 21t pinion gear......

I want to buy spare front and rear tamiya tires (stock tires less than $40 per pair) but most shop in KWS sold out. any suggestion where I can buy them?? thanks!

作者: syip89 時間: 2008-4-22 13:03
sorry, typos....

the adjustment I made was to reduce the clearance between the pinion gear and spur gear.

the pinion gear used should be 48 pitch. If you check the stock 17t and 23t pinion gear, you can see "48" printed on the side. anyway, I am tempted to put in a 21t pinion gear......

I want to buy spare front and rear tamiya tires (stock tires less than $40 per pair) but most shop in KWS sold out. any suggestion where I can buy them?? thanks!

作者: Patrick6 時間: 2008-4-22 17:48

原帖由 man2008 於 2008-4-22 12:33 發表

 登錄/註冊後可看大圖

Are you use the 48 pitch gear??

我唔知呀, 我只係買左一包雙星的麼打齒, 一包有兩粒, 一粒18t, 一粒19t, 但我唔知係唔係48 pitch 呀!

作者: man2008 時間: 2008-4-22 21:40
早幾日換左5.5R, 剛才在樓下carpark試18t gear, 喪跑三分鐘然後check車, 哇!!! 摩打同servo熱到可以煎蛋!!!

煲一枝煙時間等攤凍,立即換隻17t gear試過, 又喪跑三分鐘再check, 摩打依然辣手, 但servo已無頭先咁熱.

再攤凍煲一枝煙時間換返16t gear跑過, 重新換排full charge Lipo battery, 試完整排電, 雖然摩打都係熱, 但肯定可以接受, ESC都無因over heat 而cut power,

5.5R brushless最起碼要用16t gear.
個人感受而矣.

作者: man2008 時間: 2008-4-22 21:41

登錄/註冊後可看大圖

作者: quakequake 時間: 2008-4-22 22:20

原帖由 man2008 於 2008-4-22 21:41 發表

 登錄/註冊後可看大圖

登錄/註冊後可看大圖

師兄，你個D包住servo 同接收個D膠係咩o黎o家？可以係邊到買呀？
我都想試下呀！

作者: man2008 時間: 2008-4-22 22:31
Brother quake, 熱縮膠來的, 用風筒一吹就自動收縮, HKD$3蚊一碼, 鴨記電子零件舖有售, 可用來包電子野同直電

我目的係想將d電子野既外穀保養得好d, 第時想放都無花, 價錢又高dd囉

作者: hihizaza 時間: 2008-4-22 23:32

原帖由 quakequake 於 2008-4-22 22:20 發表

 登錄/註冊後可看大圖

師兄，你個D包住servo 同接收個D膠係咩o黎o家？可以係邊到買呀？
我都想試下呀！

you also use 熱縮膠 to protect the motor??

作者: man2008 時間: 2008-4-22 23:40

原帖由 hihizaza 於 2008-4-22 23:32 發表

 登錄/註冊後可看大圖

you also use 熱縮膠 to protect the motor??

我從來唔用熱縮膠protect motor, 因為會阻住散熱, 但呢隻5.5R例外, 因設計為開窿的, 跑泥沙地包入沙石, 入左沙石肯定爆芯 + 死啤令, 所以個motor無耐地包上熱縮膠囉

登錄/註冊後可看大圖

作者: hihizaza 時間: 2008-4-22 23:48

原帖由 man2008 於 2008-4-22 23:40 發表

 登錄/註冊後可看大圖

我從來唔用熱縮膠protect motor, 因為會阻住散熱, 但呢隻5.5R例外, 因設計為開窿的, 跑泥沙地包入沙石, 入左沙石肯定爆芯 + 死啤令, 所以個motor無耐地包上熱縮膠囉

http://img337.imageshack.us/img337/68 ...

so,it will be easy to overheat??

作者: shouldbe 時間: 2008-4-22 23:53

原帖由 man2008 於 2008-4-22 21:40 發表

 登錄/註冊後可看大圖

早幾日換左5.5R, 剛才在樓下carpark試18t gear, 喪跑三分鐘然後check車, 哇!!! 摩打同servo熱到可以煎蛋!!!
煲一枝煙時間等攤凍,立即換隻17t gear試過, 又喪跑三分鐘再check, 摩打依然辣手, 但servo已無頭先咁 ...

先多謝man2008的分享.

因為小弟太眼瞓的關係,到家陣先開工整車,所以未有測試報告

sorry all guys

另外想問問阿man2008兄,501x個大齒餅(96t)唔知fit 唔fit DB01呢?

作者: quakequake 時間: 2008-4-22 23:54
man 兄，你部車好新呀！
比起我部車，真係....

作者: man2008 時間: 2008-4-22 23:54

原帖由 hihizaza 於 2008-4-22 23:48 發表

 登錄/註冊後可看大圖

so,it will be easy to overheat??

較早前用16t gear喪跑一排LiPo, 電變都無因摩打over hear而cut power喎, ESC係Speed Passion GT, 已set over heat cut off protect fuction.
用16t gear暫試無事. check過大細齒亦無滑牙, 神恩托賴.

作者: man2008 時間: 2008-4-22 23:58
never mind brother^^, 無試過501X 96t大齒裝唔裝得落DURGA樹啵, 但表面睇我怕DURGA個大齒波箱穀會頂96t齒...

作者: man2008 時間: 2008-4-23 00:00

原帖由 quakequake 於 2008-4-22 23:54 發表

 登錄/註冊後可看大圖

man 兄，你部車好新呀！
比起我部車，真係....

因為哩部野未落過沙地路麻, 遲d跑TKO包殘:'(

作者: man2008 時間: 2008-4-23 00:01
886~
Zzzzzzzzzzzzzzzzzzzzzzzz

作者: shouldbe 時間: 2008-4-23 00:07

原帖由 Patrick6 於 2008-4-22 17:48 發表

 登錄/註冊後可看大圖

我唔知呀, 我只係買左一包雙星的麼打齒, 一包有兩粒, 一粒18t, 一粒19t, 但我唔知係唔係48 pitch 呀!

手足,check this out

[attach]159646[/attach]

作者: powis 時間: 2008-4-23 00:28

原帖由 man2008 於 2008-4-22 21:40 發表

 登錄/註冊後可看大圖

早幾日換左5.5R, 剛才在樓下carpark試18t gear, 喪跑三分鐘然後check車, 哇!!! 摩打同servo熱到可以煎蛋!!!
煲一枝煙時間等攤凍,立即換隻17t gear試過, 又喪跑三分鐘再check, 摩打依然辣手, 但servo已無頭先咁 ...

I am interested to know how long time ur car can play for each lipo battery with 5.5R motor???

作者: shouldbe 時間: 2008-4-23 00:37

原帖由 powis 於 2008-4-23 00:28 發表

 登錄/註冊後可看大圖

I am interested to know how long time ur car can play for each lipo battery with 5.5R motor???

我用6.5R,17T/91T玩約8-10mins(over 7V),試過玩over12mins drop到得6.8V.

作者: minimini 時間: 2008-4-23 02:02

原帖由 shouldbe 於 2008-4-23 00:07 發表

 登錄/註冊後可看大圖

手足,check this out

159646

嘩......好多張金牛呀 !!.......

作者: shouldbe 時間: 2008-4-23 02:35
那些是公司的數,不是我的呀

作者: man2008 時間: 2008-4-23 09:43

原帖由 powis 於 2008-4-23 00:28 發表

 登錄/註冊後可看大圖

I am interested to know how long time ur car can play for each lipo battery with 5.5R motor???

Brother,

LiPo 新電3500mAh 25C(full charge顯示3750mAh) 5.5R motor....

尋晚用DB01, 16/91 gear試車, 玩到大約十五分鐘左右, for your info.

作者: quakequake 時間: 2008-4-23 09:48
我想問，有無人試過6.5R 用 20/91 gear 呢？

作者: smallfaifai 時間: 2008-4-23 13:45

原帖由 man2008 於 2008-4-22 23:58 發表

 登錄/註冊後可看大圖

never mind brother^^, 無試過501X 96t大齒裝唔裝得落DURGA樹啵, 但表面睇我怕DURGA個大齒波箱穀會頂96t齒...

台灣有師兄試過係唔得o既……

另外而家kws都唔覺有stock buggy呔！

作者: shouldbe 時間: 2008-4-23 16:42

原帖由 smallfaifai 於 2008-4-23 13:45 發表

 登錄/註冊後可看大圖

台灣有師兄試過係唔得o既……

另外而家kws都唔覺有stock buggy呔！

而經買咗啦

(96t)
有冇師兄要呀?$10平讓

作者: Evo5 時間: 2008-4-23 16:49

原帖由 shouldbe 於 2008-4-23 04:42 PM 發表

 登錄/註冊後可看大圖

而經買咗啦 (96t)
有冇師兄要呀?$10平讓

I take it Shouldbe brother
Actually brother ....Why it has 2 bearings inside the pinion gear set ??

[ 本帖最後由 Evo5 於 2008-4-23 16:50 編輯 ]

作者: shouldbe 時間: 2008-4-23 16:52
今日測試過,發覺用16t細皮帶look係唔得,因為皮帶會大鬆,17t剛剛好.
17t細皮帶look配17t頭牙經4分鐘狂奔後溫度可以接受,加速力頭段反應非常好,8分鐘收車時溫度都算幾高,不過已比用18t細皮帶好好多.
今晚再用16t頭牙試試先.

[ 本帖最後由 shouldbe 於 2008-4-23 16:53 編輯 ]

作者: Evo5 時間: 2008-4-23 16:53
Actually all brother .........dont worry too much about the gear ratio.........Brushless is about temp......
all or most Brushless system have a temp suggestion.......so all u need to do is to check the temp and gear it up and down !!!!! As long as things are not over heat , then is ok I hope this is helpful !

作者: shouldbe 時間: 2008-4-23 16:57

原帖由 Evo5 於 2008-4-23 16:49 發表

 登錄/註冊後可看大圖

I take it Shouldbe brother
Actually brother ....Why it has 2 bearings inside the pinion gear set ??

okok,星期日tko收交啦

對 bearings 係motor座用的,我其中一粒已經散咗

,所以要買過,不是買頭牙送的呀

作者: Evo5 時間: 2008-4-23 16:57

原帖由 shouldbe 於 2008-4-23 04:52 PM 發表

 登錄/註冊後可看大圖

今日測試過,發覺用16t細皮帶look係唔得,因為皮帶會大鬆,17t剛剛好.
17t細皮帶look配17t頭牙經4分鐘狂奔後溫度可以接受,加速力頭段反應非常好,8分鐘收車時溫度都算幾高,不過已比用18t細皮帶好好多.
今晚再用16t頭牙 ...

17t細皮帶look配17t頭牙經 ...what do u mean ??
What is 17t頭牙 ??

作者: powis 時間: 2008-4-23 16:57
my DB01, 23/91 gear, 8.5R XBR, played around 12mins.

as i found that the "playale" time is too short even the speed is fast , i will change to 22T and 20T to test run.

作者: shouldbe 時間: 2008-4-23 17:02

原帖由 Evo5 於 2008-4-23 16:57 發表

 登錄/註冊後可看大圖

17t細皮帶look配17t頭牙經 ...what do u mean ??
What is 17t頭牙 ??

motor齒

作者: Patrick6 時間: 2008-4-23 17:23

原帖由 powis 於 2008-4-23 16:57 發表

 登錄/註冊後可看大圖

my DB01, 23/91 gear, 8.5R XBR, played around 12mins.
as i found that the "playale" time is too short even the speed is fast , i will change to 22T and 20T to test run.

Hi brother powis,

My DB01 is similar to yours (GTB 8.5R), I am using 17t but the speed is not fast and the temp. of the motor and ESC is cool after playing 1 pack of battery (around 39C - 43C). So I am waiting your 20t and 22t report! Thanks!

作者: powis 時間: 2008-4-23 17:43

原帖由 Patrick6 於 2008-4-23 17:23 發表

 登錄/註冊後可看大圖

Hi brother powis,

My DB01 is similar to yours (GTB 8.5R), I am using 17t but the speed is not fast and the temp. of the motor and ESC is cool after playing 1 pack of battery (around 39C - 43C). S ...

Hi brother Patrick,

Don't know the coming Sunday can join the TKO party or not...i also want to test the 20T and 22T pinion gear and see the difference with 23T.
i can accept the speed of the car slower and earn more power to play longer time.

作者: simontam 時間: 2008-4-23 19:37
標題: 回復 25# 的帖子
如麽打加熱縮膠，加jet的散熱片會好d，esc風扇加上保護膠片，另外限滑位置走線位太貼了。

[ 本帖最後由 simontam 於 2008-4-23 19:50 編輯 ]

作者: quakequake 時間: 2008-4-23 19:56
我頭先係KWS 買左18T, 19T, 一陣落街試試先！

作者: man2008 時間: 2008-4-23 20:06

原帖由 simontam 於 2008-4-23 19:37 發表

 登錄/註冊後可看大圖

如麽打加熱縮膠，加jet的散熱片會好d，esc風扇加上保護膠片，另外限滑位置走線位太貼了。

非常好的建議, 照做

作者: man2008 時間: 2008-4-23 20:07
今日又買野...

登錄/註冊後可看大圖

作者: man2008 時間: 2008-4-23 20:09

原帖由 quakequake 於 2008-4-23 19:56 發表

 登錄/註冊後可看大圖

我頭先係KWS 買左18T, 19T, 一陣落街試試先！

好~
等你報告

作者: man2008 時間: 2008-4-23 20:14

原帖由 Patrick6 於 2008-4-23 17:23 發表

 登錄/註冊後可看大圖

Hi brother powis,

My DB01 is similar to yours (GTB 8.5R), I am using 17t but the speed is not fast and the temp. of the motor and ESC is cool after playing 1 pack of battery (around 39C - 43C). S ...

hi brother Patrick6, 我之前用8.5R + 測試過21t , 22t , 23t gear, 結果最適合既齒比係21/91 gear, for you reference.

作者: man2008 時間: 2008-4-23 20:16
買左一孖90t大齒返黎 (48 pitch), 晏d裝, 試下16/90乜效果, 詳情後報, 放飯^^

作者: man2008 時間: 2008-4-23 20:17
90t(48 pitch)

登錄/註冊後可看大圖

作者: quakequake 時間: 2008-4-23 20:25
嘩，Man 兄，你都買左好多野喎！

作者: quakequake 時間: 2008-4-23 21:14
LRP TC ESC + 6.5R,
Lipo 3500mAH 25c,
19/91T (原裝雙星)

電: 玩左5分鐘 (未玩完D電，不過要食飯，所以返歸)

路面: 飛直路，經常大轉彎，接近飄移噤 (因為用頭單，再加上係滑磚上玩)

情況: 沒有斷電，ESC 熱度可以接受

後感: 感覺比17齒快左10-20%，會繼續用

其他兄弟有無報告呀？

作者: hihizaza 時間: 2008-4-23 22:10

原帖由 man2008 於 2008-4-23 20:07 發表

 登錄/註冊後可看大圖

今日又買野...

登錄/註冊後可看大圖

hi man2008,where can buy your battery??i want to but one!!

作者: minimini 時間: 2008-4-23 22:21

原帖由 man2008 於 2008-4-23 20:17 發表

 登錄/註冊後可看大圖

90t(48 pitch)

登錄/註冊後可看大圖

bro man.....these Xenon gears can be used in DB01 ??.......

[ 本帖最後由 minimini 於 2008-4-23 22:22 編輯 ]

作者: Patrick6 時間: 2008-4-23 22:45

原帖由 powis 於 2008-4-23 17:43 發表

 登錄/註冊後可看大圖

Hi brother Patrick,

Don't know the coming Sunday can join the TKO party or not...i also want to test the 20T and 22T pinion gear and see the difference with 23T.
i can accept the speed of the ...

If the weather is OK, I must go to play with all yours brothers!

作者: Patrick6 時間: 2008-4-23 22:47

原帖由 man2008 於 2008-4-23 20:14 發表

 登錄/註冊後可看大圖

hi brother Patrick6, 我之前用8.5R + 測試過21t , 22t , 23t gear, 結果最適合既齒比係21/91 gear, for you reference.

Thanks brother, I will try 20t and 21t later! Thanks!!!

作者: man2008 時間: 2008-4-23 23:37

原帖由 minimini 於 2008-4-23 22:21 發表

 登錄/註冊後可看大圖

bro man.....these Xenon gears can be used in DB01 ??.......

thanks bro minimini提醒, 齒比同size岩, 但睇漏無左中間個五角凹位, 買錯買添>.<"
好彩未拆袋, 返去換.

作者: minimini 時間: 2008-4-23 23:42

原帖由 man2008 於 2008-4-23 23:37 發表

 登錄/註冊後可看大圖

thanks bro minimini提醒, 齒比同size岩, 但睇漏無左中間個五角凹位, 買錯買添>.

......唔駛客氣.........

........ 我都買咗隻 Xenon 大減牙..... 啱裝個隻款 (for Asso B4 用)......最大去到 87T.......我諗住用隻 7.5R instead of 6.5R......攞番大 d 扭力去遷就個齒比......希望 ok 啦.......

作者: shouldbe 時間: 2008-4-23 23:47
剛測試用 16/91 17細皮帶look,溫度只有小小改善,但起油,加速及極速大有改善

,現在upload 片中,轉頭post

睇來要攪攪個大減牙,minimini兄你講個大減牙邊樹可以買到呀?

作者: minimini 時間: 2008-4-23 23:50

原帖由 shouldbe 於 2008-4-23 23:47 發表

 登錄/註冊後可看大圖

剛測試用 16/91 17細皮帶look,溫度只有小小改善,但起油,加速及極速大有改善 ,現在upload 片中,轉頭post

睇來要攪攪個大減牙,minimini兄你講個大減牙邊樹可以買到呀?

catshop.......

作者: man2008 時間: 2008-4-23 23:50

原帖由 hihizaza 於 2008-4-23 22:10 發表

 登錄/註冊後可看大圖

hi man2008,where can buy your battery??i want to but one!!

極碌

作者: man2008 時間: 2008-4-23 23:51
標題: 回復 70# 的帖子
bro minimini, B4...............Goooooooooooooooooood~~~~~~~~~~~~~~

作者: hihizaza 時間: 2008-4-23 23:52
Thanks!!!

Friday go to check check!!

作者: minimini 時間: 2008-4-23 23:55

原帖由 man2008 於 2008-4-23 23:51 發表

 登錄/註冊後可看大圖

bro minimini, B4...............Goooooooooooooooooood~~~~~~~~~~~~~~

嘻嘻.........

查實 DB01.....501X.......Asso B4......B44..........Yokomo BX.....佢哋個 slipper.........都係嗰 d 嘢之嘛........天下文章一大抄......

作者: man2008 時間: 2008-4-23 23:58

原帖由 minimini 於 2008-4-23 23:42 發表

 登錄/註冊後可看大圖

......唔駛客氣......... ........ 我都買咗隻 Xenon 大減牙..... 啱裝個隻款 (for Asso B4 用)......最大去到 87T.......我諗住用隻 7.5R instead of 6.5R......攞番大 d 扭力去 ...

brother, 7.5R for B4大牙用87t, pinion gear用幾多?
參考一下, 試下部501X跟你部B4齒比相同, 睇下乜效果

作者: shouldbe 時間: 2008-4-23 23:59
有片睇啦

http://hk.youtube.com/watch?v=9i06GmYVaRs

作者: minimini 時間: 2008-4-23 23:59

原帖由 man2008 於 2008-4-23 23:58 發表

 登錄/註冊後可看大圖

brother, 7.5R for B4大牙用87t, pinion gear用幾多?
參考一下, 試下部501X跟你部B4齒比相同, 睇下乜效果

未有時間試呀......

作者: minimini 時間: 2008-4-24 00:06
前住諭手車好堅........

http://hk.youtube.com/watch?v=YZSRUNwGYCA&feature=related

作者: man2008 時間: 2008-4-24 00:08
Thanks all bros , 886....Zzzzzzzzzzzzzzzzzzzzzzzzzz~

作者: simontam 時間: 2008-4-24 00:13
我想請問501個定風翼架(3racing)可否裝在db01上？
Thanks

作者: quakequake 時間: 2008-4-24 00:13
no one use 19 pinion.....only me...

作者: shouldbe 時間: 2008-4-24 00:19

原帖由 quakequake 於 2008-4-24 00:13 發表

 登錄/註冊後可看大圖

no one use 19 pinion.....only me...

我部車的動力類似,我相信要16t對個moto先會較好.

作者: smallfaifai 時間: 2008-4-24 01:47
I am going to use a Xenon 16T in the coming Sun TKO party.
I would try to use 17T gear first.....the others remain original.

Let's see the temp.

作者: Eddie168 時間: 2008-4-24 05:39

原帖由 simontam 於 2008-4-24 00:13 發表

 登錄/註冊後可看大圖

我想請問501個定風翼架(3racing)可否裝在db01上？
Thanks

Hi mate i tried it and the answer is NO, because 501個定風翼架 is too wide

作者: syip89 時間: 2008-4-24 10:54

原帖由 smallfaifai 於 2008-4-24 01:47 發表

 登錄/註冊後可看大圖

I am going to use a Xenon 16T in the coming Sun TKO party.
I would try to use 17T gear first.....the others remain original.

Let's see the temp.

Hi smallfaifai, before I changed to GTB 8.5R, I was using 330CR with Xenon 16T (20t pinion). The temp is slightly on the high side but acceptable after a lot of "full chicken" striaght runs.

some more questions for all DB01 owners: how often you guys will maintain the ball-diff (e.g. re-tighten the screw, re-grease)?? I heard people using ceremic diff balls, are they useful? where I can get them in HK? Thanks!!

作者: shouldbe 時間: 2008-4-25 00:16
今日再經測試之後(16MOTOR齒17細皮帶LOOK),除咗溫度有改善外,玩的時間也長了,25C 3500MAH 電可玩12MINS以上,電線溫度也大有改善呀

我會再試試用較細的減速齒,相信效果會更佳.

作者: smallfaifai 時間: 2008-4-25 00:23

原帖由 syip89 於 2008-4-24 10:54 發表

 登錄/註冊後可看大圖

Hi smallfaifai, before I changed to GTB 8.5R, I was using 330CR with Xenon 16T (20t pinion). The temp is slightly on the high side but acceptable after a lot of "full chicken" striaght runs.

so ...

我諗o個個齒比係鍵全老闆提意o既，佢話走彎會好扭力D.........不過我去TKO班兄弟個個都玩到5.5r，我諗我都會試到上20t睇下點.......

作者: Eddie168 時間: 2008-4-25 00:30
HI everyone anyone have idea what gearing should i use for Novak 4.5R? i am using the orginal spur gear and 17 pinion at the moment, anyone have better suggestion? thx

作者: ftbingobingo 時間: 2008-4-25 01:40

原帖由 Eddie168 於 2008-4-25 00:30 發表

 登錄/註冊後可看大圖

HI everyone anyone have idea what gearing should i use for Novak 4.5R? i am using the orginal spur gear and 17 pinion at the moment, anyone have better suggestion? thx

I think the ESC will easy to get overheat

作者: man2008 時間: 2008-4-25 15:38

原帖由 simontam 於 2008-4-23 19:37 發表

 登錄/註冊後可看大圖

如麽打加熱縮膠，加jet的散熱片會好d，esc風扇加上保護膠片，另外限滑位置走線位太貼了。

Brother, 跟你的建議去做, 改善晒^^
thx~

[url=]

登錄/註冊後可看大圖

[/url]

作者: man2008 時間: 2008-4-25 15:41
之前的模樣...

登錄/註冊後可看大圖

作者: Evo5 時間: 2008-4-25 16:47

原帖由 Eddie168 於 2008-4-25 12:30 AM 發表

 登錄/註冊後可看大圖

HI everyone anyone have idea what gearing should i use for Novak 4.5R? i am using the orginal spur gear and 17 pinion at the moment, anyone have better suggestion? thx

WE LOOK FORWARD TO SEE YOUR CAR RUNNING A 4.5R
U ARE THE FIRST GUY USE 4.5 SO WAITING FOR U TO LET US KNOW !

作者: man2008 時間: 2008-4-25 16:55

原帖由 Evo5 於 2008-4-25 16:47 發表

 登錄/註冊後可看大圖

WE LOOK FORWARD TO SEE YOUR CAR RUNNING A 4.5R
U ARE THE FIRST GUY USE 4.5 SO WAITING FOR U TO LET US KNOW !

一個煲到熟晒既4.5R摩打峰值轉數, 有可能等於大約7-8turn既有刷摩打.
我憑空想像...
14/91或者可以保持新鮮既, 但唔知14 pinoin gear咁細裝唔裝到呢?

作者: Eddie168 時間: 2008-4-25 23:27

原帖由 Evo5 於 2008-4-25 16:47 發表

 登錄/註冊後可看大圖

WE LOOK FORWARD TO SEE YOUR CAR RUNNING A 4.5R
U ARE THE FIRST GUY USE 4.5 SO WAITING FOR U TO LET US KNOW !

thanks for you guys support i'll do my best, i will test it on sunday if the weather is fine, i'll test it even it's bad anyway to be honest lol and will test it at my backyard first then will go to the local track few weeks later

作者: quakequake 時間: 2008-4-25 23:48

原帖由 man2008 於 2008-4-25 15:38 發表

 登錄/註冊後可看大圖

Brother, 跟你的建議去做, 改善晒^^
thx~

登錄/註冊後可看大圖

我都想買個engine 個散熱呀！你個個幾錢呀？係邊到買呀？
你個散熱會唔會頂住個殼？

作者: Eddie168 時間: 2008-4-26 00:01

原帖由 man2008 於 2008-4-25 15:41 發表

 登錄/註冊後可看大圖

之前的模樣...

登錄/註冊後可看大圖

Bro Man2008 just wanna ask you what brushless ESC and motor you using there? thx

作者: man2008 時間: 2008-4-26 12:49

原帖由 quakequake 於 2008-4-25 23:48 發表

 登錄/註冊後可看大圖

我都想買個engine 個散熱呀！你個個幾錢呀？係邊到買呀？
你個散熱會唔會頂住個殼？

Brother quake, motor散熱 HKD$30. KWS every shop has.

作者: man2008 時間: 2008-4-26 12:53

原帖由 Eddie168 於 2008-4-26 00:01 發表

 登錄/註冊後可看大圖

Bro Man2008 just wanna ask you what brushless ESC and motor you using there? thx

Brother Eddie, nice to meet you^^
Speed Passion GT brushless system.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)