RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: [mini-z] 今日放血之旅 [打印本頁]

作者: 800mah 時間: 2008-5-15 17:57
標題: [mini-z] 今日放血之旅
去買 AWD 野, 買下幾百買下幾百, 搞到.....

不過其實都唔太貴, 玩 1:10 像真個d可能幾隻轆都貴過呢堆野.

依家要去街, 今晚返黎慢慢搞

作者: 瘋語飄移 時間: 2008-5-15 18:05
@@無睇錯好似見到塊2.4g

作者: 800mah 時間: 2008-5-15 18:08

原帖由 瘋語飄移 於 2008-5-15 18:05 發表

 登錄/註冊後可看大圖

@@無睇錯好似見到塊2.4g

你無睇錯~

我玩緊部 2.4G mr02 嘛~ 梗係買多塊比 awd 啦~
比想像中平, 又唔使買 band,換天線. 抵玩過 AD Band 好多 (不過我未玩過 AD )

作者: 瘋語飄移 時間: 2008-5-15 18:16
等ex-10有mon早...再整架2.4玩下先

你快d今晚整完聽日拎上車埸玩啦

作者: 800mah 時間: 2008-5-15 18:25

原帖由 瘋語飄移 於 2008-5-15 18:16 發表

 登錄/註冊後可看大圖

等ex-10有mon早...再整架2.4玩下先你快d今晚整完聽日拎上車埸玩啦

好大工程, 今晚夜返, 可能下星期先試到車

我都想買芒早, 不過唔等啦, 雞控都玩住先啦~

作者: nottoobad 時間: 2008-5-15 19:00
Hello 800

Why you don't call me shopping together

? today I really want to buy one more 2.4G board for my AWD , but my girl friend will ...

, and I have 3 x 2.4G MR-02, and already have EX-1 set , so maybe later ...

作者: paulpoon306 時間: 2008-5-15 22:41
你好有貨呀c兄...!

作者: 800mah 時間: 2008-5-15 23:20

原帖由 nottoobad 於 2008-5-15 19:00 發表

 登錄/註冊後可看大圖

Hello 800

Why you don't call me shopping together ? today I really want to buy one more 2.4G board for my AWD , but my girl friend will ... , and I have 3 x 2.4G MR-02, and already have EX-1 ...

same with my gf, i usually don't tell her the 'aquisition' of parts that are not 'superficially' visible.
like the ball diffs, bearings, etc..

so are u gonig to MMS tomorrow? i don't think my AWD will be ready by tomorrow though

作者: GTRTam 時間: 2008-5-16 00:45
Woooooo again................1K up parts.

So both you & nottoobad are in deep hole now !

Enjoy your new toys & see u tomorrow !

作者: 800mah 時間: 2008-5-16 01:27

原帖由 GTRTam 於 2008-5-16 00:45 發表

 登錄/註冊後可看大圖

Woooooo again................1K up parts.

So both you & nottoobad are in deep hole now !

Enjoy your new toys & see u tomorrow !

it's a headache to change the AWD PCB
many times more difficult than the mr02 !!

but still easier than the Overland

作者: GTRTam 時間: 2008-5-16 02:25
Yes I remember when I change to AD, I just gave to the track keeper & did everything to me. You know that's a professional job especially the AWD chassis is not designed for AD pcb & you have to jump that 3 leads of the ICS pins to the side.

So still 2.4 GHz pcb is better coz' the ICS is designed coming out from top & the new top cover has that vent already.

I'm waiting & waiting to see when Kyosho will release the new 4pins ICS interface for the 2.4GHz.

作者: nottoobad 時間: 2008-5-16 03:25

原帖由 800mah 於 2008-5-15 23:20 發表

 登錄/註冊後可看大圖

same with my gf, i usually don't tell her the 'aquisition' of parts that are not 'superficially' visible.
like the ball diffs, bearings, etc..

so are u gonig to MMS tomorrow? i don't thi ...

我邊有可能唔比佢知，就算我靜靜雞換咗唔出聲

，轉頭一齊上到車場D人話你又換咗新野呀

，到時咪死得重慘

。

我宜家重想買多3塊2.4G，1塊AWD，1塊MR-01同1塊比overland咁就舒服哂

!

聽日要去飲(咁就冇咗 Full set2.4G)

，星期六夜晚或星期日你得唔得閑呀?得就到時見啦

作者: henry888 時間: 2008-5-16 13:00
oh...all 3racing parts

作者: WallaceNg 時間: 2008-5-16 13:09
1/10 d轆又點會貴過你呢堆野啊

作者: 800mah 時間: 2008-5-16 13:27

原帖由 WallaceNg 於 2008-5-16 13:09 發表

 登錄/註冊後可看大圖

1/10 d轆又點會貴過你呢堆野啊

你去睇下 1:10 慢爬呀, 貨櫃車呀個d橡真合金鈴幾錢...

我呢堆野加埋都係一千零幾十

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)