RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 改CR-01一問.. [打印本頁]

作者: kitkit2007    時間: 2008-5-20 21:59
標題: 改CR-01一問..
我想問下改4輪轉向咁個servo咪冇左果幾個鐵圈??
同埋加鉛多數係點加架??加幾重到..同埋邊到有得買?
唔該各位..

[ 本帖最後由 kitkit2007 於 2008-5-21 00:43 編輯 ]
作者: jacobchu2007    時間: 2008-5-20 22:17
Buy a servo saver, ~3x
作者: kitkit2007    時間: 2008-5-20 22:31
saver 呢個係咩??
作者: jackychan1203    時間: 2008-5-20 22:32
本人未買但CR01唔係4WS咩
作者: kitkit2007    時間: 2008-5-21 00:03
原帖由 jackychan1203 於 2008-5-20 22:32 發表
本人未買但CR01唔係4WS咩


係4ws..要加servo
作者: kitkit2007    時間: 2008-5-21 08:31
有冇人可以教我點做
作者: 馬田    時間: 2008-5-21 08:43
加鉛通常加入車轆入面.
作者: Patrick6    時間: 2008-5-21 08:54
原帖由 kitkit2007 於 2008-5-21 08:31 發表
有冇人可以教我點做

可以參考舊文, 請善用"搜索" 功能

http://bbs.rc-evo.com/viewthread ... light=servo%2Bsaver

http://bbs.rc-evo.com/viewthread ... mp;highlight=%B9%5D

http://bbs.rc-evo.com/viewthread ... mp;highlight=%B9%5D

至於加鉛多數係點加, 加幾重到, 就個個唔同, 一般玩慢爬的, D 鉛會加到車軨內, 頭軨一般每隻加重200-300g, 後軨每隻加重0-100g, 視乎個人需要, 希望幫到你!

[ 本帖最後由 Patrick6 於 2008-5-21 08:56 編輯 ]
作者: justinic    時間: 2008-5-21 09:53
crawler 應該唔用servo saver?
otherwise 個steering power/angle 可能唔夠
作者: Patrick6    時間: 2008-5-21 10:18
原帖由 justinic 於 2008-5-21 09:53 發表
crawler 應該唔用servo saver?
otherwise 個steering power/angle 可能唔夠

But the original design for CR-01 has used a servo saver (manual page 8 refers), and 樓主 want to add another servo to modify the CR-01 to becomes 4-wheel steering, so he is asking where can he buy an additional servo saver.

But you are correct that most crawler may not be used servo saver as the steering power may not be good enough to sheer the Big Big and heavy wheel. That means CR-01 is not really a ..........crawler

[ 本帖最後由 Patrick6 於 2008-5-21 10:19 編輯 ]
作者: edison    時間: 2008-5-21 10:41
原帖由 Patrick6 於 2008-5-21 08:54 發表

可以參考舊文, 請善用"搜索" 功能

http://bbs.rc-evo.com/viewthread ... light=servo%2Bsaver

http://bbs.rc-evo.com/viewthread ... mp;highlight=%B9%5D

http://bbs.rc-evo.com/ ...


Don't add any lead on the rear wheel!
作者: orange00    時間: 2008-5-21 13:17
原帖由 edison 於 2008-5-21 10:41 發表


Don't add any lead on the rear wheel!

Pb FREE
作者: leoleo    時間: 2008-5-21 13:19
我刚刚改了CR01的双舵
第二舵需要的零件如下:
1、四颗3mm螺母
2、舵机保护器一个(或者用舵机臂)
另外拉杆等都是原装已经赠送的
作者: edison    時間: 2008-5-21 15:31
原帖由 orange00 於 2008-5-21 13:17 發表

Pb FREE


RoHS
作者: mikewu    時間: 2008-5-21 15:38
原帖由 edison 於 2008-5-21 15:31 發表


RoHS


Toys should be "lead free"... otherwise the American people might sue our A-ss.......  
作者: orange00    時間: 2008-5-21 15:52
原帖由 mikewu 於 2008-5-21 15:38 發表


Toys should be "lead free"... otherwise the American people might sue our A-ss.......  

I always think it only happen when they can't sell their product out.
作者: orange00    時間: 2008-5-21 15:54
BTW, I'm quite interest the CR-01 gearbox. Any brother can show me the semi assembly photo or where can I find the assembly manual?
作者: Patrick6    時間: 2008-5-21 17:47
原帖由 orange00 於 2008-5-21 15:54 發表
BTW, I'm quite interest the CR-01 gearbox. Any brother can show me the semi assembly photo or where can I find the assembly manual?

Here you are brother:
http://www.tamiyausa.com/product/item.php?product-id=58405

You can download the "Product Manual" at the upper right corner!

[ 本帖最後由 Patrick6 於 2008-5-21 17:59 編輯 ]




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2