RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 對atomic o既parts好失望 :( [打印本頁]

作者: gegegum 時間: 2006-4-28 01:53
標題: 對atomic o既parts好失望 :(
今日去kws諗住買條awd2度尾toe in, 開頭諗住買rcmodel或者3racing(因為平d),點知rcmodel賣晒,3racing冇晒單條買,淨返set裝(1套4條0-3度,不過都係$80),咁咪比貴d買條atomic啦,點知返黎裝上架車度,發覺d虛位好大,起碼有0.3~0.5mm,我之前條3racing1度都不知幾fit!之前4條萬向已經把幾火!d虛位1係大到離譜,真係估唔刑一條咁簡單o既軑呎都咁失敗!佢賣貴d就算唔好過人都唔好咁差丫!我話過以後都唔買佢d parts!!!!!!!!!

(p.s. 好彩個珠差暫時都幾好!)

[ 本帖最後由 gegegum 於 2006-4-28 01:56 編輯 ]

作者: hkopium 時間: 2006-4-28 03:04
係呀, 近呢幾個月, Atomic 既野我擺買. 比 Mini Inferno 同 AWD 既 hop ups 完全唔惦, 唔 fit 位. 同 Mini-Z MR-02 時既出品直頭好似兩間公司咁. 唉.

呢輪, 都係 3Racing 可靠D.

作者: RX78amuroray 時間: 2006-4-28 19:33
我買 AWD 萬向都要自己執一執

作者: tux 時間: 2006-4-29 10:30
May be because they want the parts to come out before 3-racing ...

I also bought the AWD universal shafts and they were so bad that I changed back to the original Kyosho ones. Then I got the 3-racing ones and they were super fit. ...

原帖由 RX78amuroray 於 2006-4-28 19:33 發表
我買 AWD 萬向都要自己執一執

作者: samy 時間: 2006-4-29 11:21
DO YOU GUYS USE THE "ATM' BALL DIFF. I'VE TRY IT AND IT IS SO COOL AND SMART DESIGN (EASY TO ADJUST). ON THE OTHER HAND, I GUESS 'ATM' WILL NEED BETTER QC. IN THE FUTURE. IN POSITIVE WAY, IF YOU FIND SOME PRODUCT DOES NOT SATISFY, IT IS BETTER REFLECT THE
PROBLEM TO RC SHOP OR PRODUCER LET THEM TO FIX. AND FINALLY, ALL THE CUSTOMERS CAN ENJOIN RC.

作者: gegegum 時間: 2006-4-29 12:28
咁我想問atomic有冇投訴部! 因為我真係好鬼興!!!!!

作者: hkopium 時間: 2006-4-29 12:32

原帖由 gegegum 於 2006-4-29 12:28 發表
咁我想問atomic有冇投訴部! 因為我真係好鬼興!!!!!

ME TOO! 有就公告出黎, 我第一個打去投訴!!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)