想問BRUISER

有無兄弟有山豬波箱的爆炸圖? 同埋除EBAY之外有咩網多零件賣(覆製也可), 另外想問問, 頭輪是否有單向的? THANKS

[ 本帖最後由 ftbingobingo 於 2008-8-12 17:56 編輯 ]

try this link, it's the service manual for the Tamiya Mountaineer / Bruiser gearbox in pdf format :

http://kope.com/bruiser/TrannySvcManual.pdf

頭輪是有單向

THANKS BROTHERS

frankie,  u have bought a BRUISER ?

原帖由 Sin 於 2008-8-12 13:47 發表

                               
登錄/註冊後可看大圖

try this link, it's the service manual for the Tamiya Mountaineer / Bruiser gearbox in pdf format :

http://kope.com/bruiser/TrannySvcManual.pdf

好厲害

一個普通人都唔會拆開既波箱
拆開左好難砌番埋
佢居然拆開逐 part 研究寫介紹
仲寫成 25 頁咁多
好似d工業用機器既說明書咁  

爆炸圖我都係以前在砌 mountaineer 果時在某個細盒表面見過
呢本真係每個 bruiser 車主都應該收藏既經書

[ 本帖最後由 kchx2 於 2008-8-12 15:26 編輯 ]

我個都拆開1年都未得閒砌翻埋。唔知我砌唔砌得翻。哈哈。買翻d bearing先。

Explored view as below:

http://kope.com/bruiser/Exploded.pdf

原帖由 go2usie 於 2008-8-12 15:11 發表

                               
登錄/註冊後可看大圖

frankie,  u have bought a BRUISER ?

Yes, 玩到無野好玩

原帖由 Sin 於 2008-8-12 15:51 發表

                               
登錄/註冊後可看大圖

Explored view as below:

http://kope.com/bruiser/Exploded.pdf

唔該晒, 要諗諗去唔去挑戰難度

I want to 玩玩 too.

I have modded bearings inside the tranny too, not too difficult just follow the pdf step by step, but there are arond 4 850 bearings cannot replaced unless you have special machine. next target is to get a 1981 hilux and do the same. bearings you can buy in local shop or goes to http://www.rcrockcrawling.com/product_info.php?products_id=371

原帖由 denden 於 2008-8-12 17:13 發表

                               
登錄/註冊後可看大圖

I have modded bearings inside the tranny too, not too difficult just follow the pdf step by step, but there are arond 4 850 bearings cannot replaced unless you have special machine. next target is to  ...

Hi, brother, does the bearing set include the special bearing inside the tranny?

yes it includes all including the tranny but excluding the 4 bearings for wheel hub

原帖由 denden 於 2008-8-12 18:02 發表

                               
登錄/註冊後可看大圖

yes it includes all including the tranny but excluding the 4 bearings for wheel hub

thanks brother, 我想訂一堆野, 有無兄弟一齊訂慳番d郵費?

I might order sth but not now, I need to wait for the confirmation of the 1981 hilux 1st. Can you wait?

原帖由 denden 於 2008-8-12 18:28 發表

                               
登錄/註冊後可看大圖

I might order sth but not now, I need to wait for the confirmation of the 1981 hilux 1st. Can you wait?

brother pls PM your phone no. to me to discuss

If any brother has problem with the gearbox, let me know. I may be able to help.