RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: ax10 torque twist 怎解決? [打印本頁]

作者: justinic    時間: 2008-9-4 12:21
標題: ax10 torque twist 怎解決?
睇rccrawler
有d人話要 加硬後面左邊既spring,高度數既油 (依個只係coverup, cant solve the problem ??)
有d話 要 4 links ( 唔要stock 果支三叉)
有d 話double traingulation links
有d話 mirror transmission

各位大佬你地用咩方法去解決?有冇師兄做過以上既野?? tks!!

另.....有冇人知咩係anti-squat ? 1:10touing 我聽過, 不過crawler都有??
作者: edison    時間: 2008-9-4 12:36
Using internal spring  will solve your problem!!!
作者: edison    時間: 2008-9-4 12:39
I have some picture for your reference!


                               
登錄/註冊後可看大圖



                               
登錄/註冊後可看大圖


[ 本帖最後由 edison 於 2008-9-4 12:40 編輯 ]
作者: sunfffd    時間: 2008-9-4 12:45
I think anti-squat is only measurable with the use of suspension arms like touring cars or buggy?
Because it seems that the geometry of 4-links (on AX10) will not have much effect with anti-squat as the shock is not parallel to the travel of the axle

as brother edison showed us, internal lower spring config will eliminate torque twist because the will not be any room on the shock for eating up the torque in stationary position

[ 本帖最後由 sunfffd 於 2008-9-4 12:49 編輯 ]
作者: justinic    時間: 2008-9-4 13:06
tks brothers!

your internal spring = droop set up???

i use droop already at the front, so need to use droop  also at the rear?
作者: sunfffd    時間: 2008-9-4 13:20
原帖由 justinic 於 2008-9-4 13:06 發表
tks brothers!

your internal spring = droop set up???

i use droop already at the front, so need to use droop  also at the rear?


yes! all droop setup
because a conventional shock setup using outer shock will have room to be compressed, so the torque that cannot be transferred to the wheels will be transferred to the shock by the drive shaft rotation
作者: edison    時間: 2008-9-4 13:25
原帖由 justinic 於 2008-9-4 13:06 發表
tks brothers!

your internal spring = droop set up???

i use droop already at the front, so need to use droop  also at the rear?


We will have rock crawling party in Shek O this Sunday, do you want to join?
作者: justinic    時間: 2008-9-4 13:32
hi, edision. very want to join but not free this sunday.

you all have meeting every month?
作者: justinic    時間: 2008-9-4 13:33
標題: 回復 6# 的帖子
tks i will droop all and see
作者: edison    時間: 2008-9-4 13:34
原帖由 justinic 於 2008-9-4 13:32 發表
hi, edision. very want to join but not free this sunday.

you all have meeting every month?


Yes!!!!
Some time is Rock party, some time is Mod party!!!




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/) Powered by Discuz! X3.2