RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TB EVO 5 頭直軸 [打印本頁]

作者: chunfai 時間: 2008-9-18 18:57
標題: TB EVO 5 頭直軸
TB EVO 5 頭直軸自家製

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: ～飄道～ 時間: 2008-9-18 19:11

犀利~呢個我有興趣~唔知TBEVO5MS岩唔岩呢~
師兄可以分享下做法嗎~

作者: Administrator 時間: 2008-9-19 00:16
the worksmanship looks quite good!

回復 2# 的帖子
but to make your own diff, you'll need a lathe, and that needs space and money!

(a decent lathe can occupy alot of space in the flat...)

作者: ～飄道～ 時間: 2008-9-19 09:05

原帖由 Administrator 於 2008-9-19 00:16 發表

 登錄/註冊後可看大圖

the worksmanship looks quite good!

回復 2# 的帖子
but to make your own diff, you'll need a lathe, and that needs space and money! (a decent lathe can occupy alot of space in the ...

我冇可能做到啦~

作者: chunfai 時間: 2008-9-19 15:56

原帖由 Administrator 於 2008-9-19 00:16 發表

 登錄/註冊後可看大圖

the worksmanship looks quite good!

回復 2# 的帖子
but to make your own diff, you'll need a lathe, and that needs space and money! (a decent lathe can occupy alot of space in the ...

Thankyou very much...!

作者: chunfai 時間: 2008-9-23 10:45
標題: 回復 2# 的帖子
tb evo 5 ms 係應岩裝...
因為佢地個波箱係一樣

作者: 烈火之魂 時間: 2008-9-25 01:04
正喎~~但係我已經用evo4裝左lu~~~

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)