RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 6EX-2.4 X 617FS receiver [打印本頁]

作者: 馬輝 時間: 2008-10-16 02:05
標題: 6EX-2.4 X 617FS receiver
究竟可唔可以配對到的?

因為成條KWS冇晒606,所以逼住買617...點知配對唔到

作者: eleung838 時間: 2008-10-16 03:28

原帖由馬輝於 2008-10-16 02:05 發表

 登錄/註冊後可看大圖

究竟可唔可以配對到的?

因為成條KWS冇晒606,所以逼住買617...點知配對唔到

Must Can

FASST Module/Receiver Sets

See Futaba Transform current flight systems for FASST Results

http://2.4gigahertz.com/modules/modules-receivers.html

作者: 馬輝 時間: 2008-10-16 06:27

原帖由 eleung838 於 2008-10-16 03:28 發表

 登錄/註冊後可看大圖

Must Can

FASST Module/Receiver Sets

See Futaba Transform current flight systems for FASST Results

http://2.4gigahertz.com/modules/modules-receivers.html

then how come i can't pair my 617 with the 6EX 2.4?

i turned on everything, i had the receiver connected...i pushed the easy link switch for more than one second...the green light never turned solid, just kept blinking

[ 本帖最後由馬輝於 2008-10-16 07:40 編輯 ]

作者: chun.law 時間: 2008-10-16 07:59
咁奇怪

[ 本帖最後由 chun.law 於 2008-10-16 08:00 編輯 ]

作者: 馬輝 時間: 2008-10-16 10:03

原帖由 chun.law 於 2008-10-16 07:59 發表

 登錄/註冊後可看大圖

咁奇怪

something even stranger was discovered in the futaba-rc.com about 6EXs being only able to pair 606s

http://2.4gigahertz.com/faq/faq-6ex-2_4ghz-q890.html

[ 本帖最後由馬輝於 2008-10-16 10:04 編輯 ]

作者: kowan77 時間: 2008-10-16 10:11

原帖由馬輝於 2008-10-16 10:03 發表

 登錄/註冊後可看大圖

something even stranger was discovered in the futaba-rc.com about 6EXs being only able to pair 606s

http://2.4gigahertz.com/faq/faq-6ex-2_4ghz-q890.html

NO! TM-8 can use 606S 617FS 608S

[ 本帖最後由 kowan77 於 2008-10-16 10:13 編輯 ]

作者: cokeboy989 時間: 2008-10-16 10:15
標題: R606FS 2.4G Receiver (Bulk-Packing) !

WAIGO HOBBY ! IN STOCK " R606FS 2.4G Receiver (Bulk-Packing) " !

作者: 馬輝 時間: 2008-10-16 10:23

原帖由 kowan77 於 2008-10-16 10:11 發表

 登錄/註冊後可看大圖

NO! TM-8 can use 606S 617FS 608S

then how about 6EX? they have said that 6EX can function with 606 only, but their table said that 617 is also fine with 6EX...this is where i got lost...

作者: 馬輝 時間: 2008-10-16 10:24

原帖由 cokeboy989 於 2008-10-16 10:15 發表

 登錄/註冊後可看大圖

WAIGO HOBBY ! IN STOCK " R606FS 2.4G Receiver (Bulk-Packing) " !

thanks a lot for the tip, maybe dropping in tonite

作者: chun.law 時間: 2008-10-16 10:28
6ex係用唔到617

作者: chun.law 時間: 2008-10-16 10:28
馬輝 :你隻617sell?我想要

作者: 馬輝 時間: 2008-10-16 10:29

原帖由 chun.law 於 2008-10-16 10:28 發表

 登錄/註冊後可看大圖

6ex係用唔到617

thats according to their FAQ, but check out their table in the FASST webpage...

作者: yin1992 時間: 2008-10-16 11:31
我都想要

可否送給我

作者: 馬輝 時間: 2008-10-16 11:39

原帖由 chun.law 於 2008-10-16 10:28 發表

 登錄/註冊後可看大圖

馬輝 :你隻617sell?我想要

i will call you later to confirm

作者: lsl86712 時間: 2008-10-16 11:42
標題: 回復 13# 的帖子
我送比你啦.....不過你送你個控比我先

作者: kowan77 時間: 2008-10-16 12:15

原帖由馬輝於 2008-10-16 10:23 發表

 登錄/註冊後可看大圖

then how about 6EX? they have said that 6EX can function with 606 only, but their table said that 617 is also fine with 6EX...this is where i got lost...

6EX will can use 608S

but only 617FS cannot

[ 本帖最後由 kowan77 於 2008-10-16 12:16 編輯 ]

作者: 馬輝 時間: 2008-10-16 12:18

原帖由 kowan77 於 2008-10-16 12:15 發表

 登錄/註冊後可看大圖

6EX will can use 608S but only 617FS cannot

that is so strange too...

could it be that any 60X is fine but not 61X?

作者: kowan77 時間: 2008-10-16 12:55

原帖由馬輝於 2008-10-16 12:18 發表

 登錄/註冊後可看大圖

that is so strange too... could it be that any 60X is fine but not 61X?

I don't know ! I test with radio control and receiver

TM8 back have to chose 7 or 8

use 606s is chose 8 is OK !!! but 7 is cannot

[ 本帖最後由 kowan77 於 2008-10-16 13:22 編輯 ]

作者: eleung838 時間: 2008-10-16 13:43
Anybody know
what different between 606 and 617?

有沒有人知道 606 和 617 的分別?

作者: kwcgary 時間: 2008-10-16 13:45
標題: 回復 19# 的帖子
6ch同7ch既分別

作者: eleung838 時間: 2008-10-16 14:33

原帖由 kwcgary 於 2008-10-16 13:45 發表

 登錄/註冊後可看大圖

6ch同7ch既分別

oic
therefore 6EX can not use on 617

But Futaba FASST Module/Receiver Sets Table said can use??????

http://2.4gigahertz.com/modules/modules-receivers.html

[ 本帖最後由 eleung838 於 2008-10-16 14:37 編輯 ]

作者: 馬輝 時間: 2008-10-16 15:52

原帖由 eleung838 於 2008-10-16 14:33 發表

 登錄/註冊後可看大圖

oic
therefore 6EX can not use on 617

But Futaba FASST Module/Receiver Sets Table said can use??????

http://2.4gigahertz.com/modules/modules-receivers.html

this is what puzzled me all night long, so i wrote to futaba, awaiting their clarification on this.

作者: 馬輝 時間: 2008-10-16 22:51
i human-cannonballed myself to waigo after work and had a word with the chaps there, they all thought "did i stick the antennae together?" so i went home and tried their suggestion, voila! its a perfect match!

作者: eleung838 時間: 2008-10-17 01:11
Wow
Good

作者: kowan77 時間: 2008-10-17 11:11

原帖由馬輝於 2008-10-16 22:51 發表

 登錄/註冊後可看大圖

i human-cannonballed myself to waigo after work and had a word with the chaps there, they all thought "did i stick the antennae together?" so i went home and tried their suggestion, voila! its a perfe ...

Let me try

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://jk.rc-evo.com/xbbs/)