RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: vash
打印 上一主題 下一主題
收起左側

送給自己的父親節禮物,設計破格的 Schumacher SupaStox !!

  [複製鏈接]
跳轉到指定樓層
1#
vash 發表於 2012-6-21 14:25:12 | 顯示全部樓層 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 vash 於 2012-6-21 15:12 編輯

推出不到兩個月,在網上番閱了數次組裝說明書,被其破格的設計吸引…扑搥!

                               
登錄/註冊後可看大圖

開箱,為節省運費,連同補品一次過買

                               
登錄/註冊後可看大圖

盒細細,包車呔及鈴,車殼另購

                               
登錄/註冊後可看大圖

這是Schumacher 的傳統嗎?入面按製作步驟分袋

                               
登錄/註冊後可看大圖

開工

                               
登錄/註冊後可看大圖

CNC S1 composite = Fibre ?

                               
登錄/註冊後可看大圖

先裝電池架

                               
登錄/註冊後可看大圖

摩打座

                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖

破格的扭腰設計

                               
登錄/註冊後可看大圖

搞掂!

                               
登錄/註冊後可看大圖


和大家一樣我也在想,尾軸行直 sub ? 消息透露遲 d 有差速部件。Anyway, 過幾天去 JV 試跑!
2#
 樓主| vash 發表於 2012-6-21 14:57:36 | 顯示全部樓層
按說明書提示,這部車可以作 Oval 和 Circuit 兩種設定。現在我是根據 circuit 的參數作調整。
3#
 樓主| vash 發表於 2012-6-21 15:20:05 | 顯示全部樓層
回復 macau-rc 的帖子

Almost the same as M-Chassis.Check this out, aside is an ABC Gambado.

                               
登錄/註冊後可看大圖

I am thinking to try some M-Chassis slick tires on this Supatox.
4#
 樓主| vash 發表於 2012-6-21 19:07:05 | 顯示全部樓層
我在上週對英鎊12:1時購入,剩車價剛好等於港幣一千。
5#
 樓主| vash 發表於 2012-6-22 04:22:06 | 顯示全部樓層
回復 丘比凸 的帖子

Front, either 48mm or 52mm.
Rear, 52mm. Both are foam tires.
6#
 樓主| vash 發表於 2012-6-22 04:23:25 | 顯示全部樓層
回復 gantei 的帖子

I bought this kit when the rate of GBP staying around 11.95 to 12.02 of currency.
7#
 樓主| vash 發表於 2012-6-22 11:14:07 | 顯示全部樓層
gimsink 發表於 2012-6-22 10:23
Did you order direct from Schumachur, they listed GBP99.85, = HK$1200 ( you said HK1000 vs GBP rate  ...

Yes , direct order from Schumacher. The price GBP99.85 u saw is including VAT (tax). For customer outside EU, VAT is waived. Thus, GBP99.85 /1.2 x 12, u do the math la.
8#
 樓主| vash 發表於 2012-6-22 17:57:34 | 顯示全部樓層
本帖最後由 vash 於 2012-6-22 18:00 編輯

First of all. The shipping for the first 2kg of package will charge you around GBP20 by Royal Air Parcel. In my case, I ordered many option parts with body shell as well that weight around 2.3kg. For order over 2kg will send by UPS, my package cost is around GBP23, still reasonable.

This car just like a touring car. You better buy different size of pinions, o-ring and springs to fine tune the setting. Be aware, kit comes with 32dp of pitch on gear transmission. If you want to use 48dp, it is time to buy the option parts with 48dp instead of 32dp.

IMHO.
9#
 樓主| vash 發表於 2012-6-23 01:30:59 | 顯示全部樓層
恭喜師兄!
10#
 樓主| vash 發表於 2012-7-2 01:51:03 | 顯示全部樓層

不用怕,上網郵購咪得。
11#
 樓主| vash 發表於 2012-7-2 01:53:04 | 顯示全部樓層
gantei 發表於 2012-6-30 04:52
my order arrived today...start building it, hope to try this car soon.

This kit is very easy to build, just a few hours work.
12#
 樓主| vash 發表於 2012-7-2 17:14:41 | 顯示全部樓層
如一次過買一部車加殼加一些option parts,重量大約 2-3kg,佢會自動轉用 UPS 快遞,落單後幾天送到。
13#
 樓主| vash 發表於 2012-7-2 20:18:56 | 顯示全部樓層
Either VISA/Master or Paypal is OK.
14#
 樓主| vash 發表於 2012-7-2 20:43:41 | 顯示全部樓層
如有其他師兄想買哩部車請先下載 manual 睇睇有什麼 parts 合用並一次過選購為佳。個人提議,因原裝 kit set 跟 32p 既 gear 系統。如想和其他車共用 pinion gear parts,可改購 48p的。
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-6-7 19:29 , Processed in 0.134107 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表