New buggy ~ Aero A-one ( Durango )

It 's Durango....but named A-one by Aero

Let me guess, you read the news from Aero website or Oople? If oople, then you should be able to read the announcement both Durango and Aero made regarding this issue. I really love this buggy too, I am hoping they can really push it out..

原帖由 joho 於 2007-5-21 14:58 發表
Yes, Hara use this to won the pre-world. But I think right now Durango are in some legal action against Aero right now, for direct copy/ stealing his design..

But the web said ....the Company Aero...bought the design....let me check it again !

Yes, Hara use this to won the pre-world. But I think right now Durango are in some legal action against Aero right now, for direct copy/ stealing his design..

原帖由 eason 於 20/5/2007 01:23 AM 發表
我諗呢部車可以低一眾勁車......個 design 肯定可取.....不過亦唔可以唔記得車手隻手指, motor & electronics 同樣重要....



我覺得窄底板喺 d 連續嘅 S 彎係著數 d 嘅.....另外 s ...

唔係跑五分鐘!?途中要換電???

我諗呢部車可以低一眾勁車......個 design 肯定可取.....不過亦唔可以唔記得車手隻手指, motor & electronics 同樣重要....



我覺得窄底板喺 d 連續嘅 S 彎係著數 d 嘅.....另外 stick pad 換電點都快過分体電啦.....

原帖由 billgate803 於 18/5/2007 10:53 PM 發表
呢部 a1 咁勁, 相信因為佢底板夠窄.

其實 tamiya df03 改左個servo 係頭, 再cut左 底板兩邊, 電子野放係電上面, 會仲窄過 呢部 a1 durango.

另外仲有保留其直電優點.

點解你認為佢a1係因為個底板夠窄呢!?
同埋你又認為直電有咩優點呢!?

[ 本帖最後由 ALEXANDER 於 2007-5-20 01:13 編輯 ]

原帖由 sgg 於 2007-5-20 00:40 發表
HARA use this in 06 pe-world

really ???

HARA use this in 06 pe-world

原帖由 billgate803 於 2007-5-1 22:36 發表



果然係勁野~
made by hard plastic with graphite .

還記得你不喜歡膠底板.

不必太失望既, hard plastic with graphite 不竟是特殊物料.

夷!好衰.....甘記得人地講過口既野

呢部 a1 咁勁, 相信因為佢底板夠窄.

其實 tamiya df03 改左個servo 係頭, 再cut左 底板兩邊, 電子野放係電上面, 會仲窄過 呢部 a1 durango.

另外仲有保留其直電優點.

[ 本帖最後由 billgate803 於 2007-5-18 22:59 編輯 ]

原帖由 fyin 於 2007-5-2 01:16 發表
But the photo shown is the Alum. chassis, may be its option or modify parts.

or just the prototype only........

But the photo shown is the Alum. chassis, may be its option or modify parts.

原帖由 barrypops 於 2007-5-1 03:44 發表


And this buggy won the race in UK recently !
defeat   slim4 , X-5, bj4....X11

果然係勁野~
made by hard plastic with graphite .

還記得你不喜歡膠底板.

不必太失望既, hard plastic with graphite 不竟是特殊物料.

Very attractive.......... looks even stronger than the 501.....  When the indoor buggy track upens...  This will be MINE!!

原帖由 billgate803 於 2007-5-1 02:10 發表
呢架野幾型

And this buggy won the race in UK recently !
defeat   slim4 , X-5, bj4....X11

原帖由 fyin 於 2007-5-1 01:59 發表
大家唔知有冇留意底板係6~7mm 厚CNC鋁板一件過出+偷輕
仲使密要二樓板呀. 撞都唔爛啦.

But the company said....the chassis will be made by hard plastic with graphite ......

呢架野幾型

大家唔知有冇留意嗰底板係6~7mm 厚CNC鋁板一件過出+偷輕
仲使密要二樓板呀. 撞都唔爛啦.

睇落好似唔jump得，唔撞得，只可以行得同走得 !!