(有相)今日終於買左Dark Impact.....

<P>oh.... no money again.......<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/mad.gif" border=0 smilieid="11"> </P>
<P>need to buy ESC and motor..... no money....<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/mad.gif" border=0 smilieid="11"> </P>
<P>&nbsp;</P>
<P>by the way, I consider to buy MC230 ($250) and a motor better than "black pig" (I want a 23T)</P>
<P>&nbsp;</P>
<P>any recommendation ?</P>

[ 本帖最後由 bigben 於 2007-5-11 11:26 編輯 ]

Where can I buy the parts???

And I am using this type of motor

原帖由 rk2 於 2007-5-11 01:12 PM 發表


I think buggy need more torque than touring, so suggest to use smaller T in the pinion gear and may be the ESC will not be so hot. just a suggestion, not sure it really work.

but I just use the org. gear ratio the "Big Teeth" is using the Tamiya option one

[ 本帖最後由 mark999hk 於 2007-5-12 09:19 編輯 ]

原帖由 RCman 於 2007-5-12 00:37 發表
BigSize LRP IPC series ESC

My Dark Impact DF03
and..I brough the Keen Hawk Shell, next time my DF03 called Keen Hawk

I think if the window is left clear it would be better !! ( my view only)

My car was crashed tonight.... right wheel hit the wall.....

The screw MA4 (9804200) and a part MD3 (51100) were lost , where can I buy them back??

thanks a lot!

<P>Great colour!!</P>
<P>how much is your parts A &amp; B ?<IMG alt="" src="http://bbs.rc-evo.com/images/smilies/smile.gif" border=0 smilieid="1"> </P>

BigSize LRP IPC series ESC

My Dark Impact DF03
and..I brough the Keen Hawk Shell, next time my DF03 called Keen Hawk

原帖由 bigben 於 2007-5-11 09:55 發表
<P>finished yesterday night !!!!</P>
<P>I use the colour Yellow, is it good??<IMG alt="<img" src="./images/smilies/biggrin.gif" border=0 smilieid=" ...

1. Yellow colour is nice and attractive. But I don't know whether yellow will be quite close to the color of the mud in TKO. At such, your car may not be easily identified.

2. There are a lot of "high hand" in TKO (Tseng Kwan O) industrial area outside the "Next Media" building. I have been there twice and learn a lot from them. (of couse, I am a "low hand" who havn't played RC for around than 15 yrs....)

原帖由 mark999hk 於 2007-5-11 09:57 發表

But I think the mc230 is not enough for the 23T on this car~~coz I use 330 with 25T motor~~~the 330 is quite hot after played.  Just a comment.


Maybe you can add a fun will be ok

I think buggy need more torque than touring, so suggest to use smaller T in the pinion gear and may be the ESC will not be so hot. just a suggestion, not sure it really work.

but I have no real car...

If you drive, go with the TKO Industrial Area sign and then turn right at TKO Fire station. And keep going straight after a traffic light and you will see a big open area on your left. That is where  you park your car and play. Free of charge.

原帖由 007 於 2007-5-11 12:29 發表
RCman, I hope to test drive my Brat at TKO this Sunday too. Need to get a licence to play though.

I want to TKO play buggy too
My DF03 play @ Diamond hill once only
I hop-up a lot of parts now, need to test...........and want to test my modified Emaxx-truggy

I post my DF03 pics tonight for sharing

in which location in TKO?

If I am a newcomer only, with a simple car only..... accept me??

need to pay entrance fee?? how many guys there? any facilities to charge my battery there??

RCman, I hope to test drive my Brat at TKO this Sunday too. Need to get a licence to play though.

原帖由 bigben 於 2007-5-11 12:26 PM 發表
All big brothers, where do you play buggy in HK?

TKO

All big brothers, where do you play buggy in HK?

原帖由 007 於 2007-5-11 12:16 發表
Nice yellow colour wor. People use VSF1 for DF03 to fit the small compartment.

I use LRP "SR" esc, size is not small, but no motor limited
It can fit the bath-tube. But is set the ESC vertically

Nice yellow colour wor. People use VSF1 for DF03 to fit the small compartment.

no other means........

I use more than 3 hours to set up the receiver, ESC, the cable of motor and battery..... they are too packed and the cover can't fit in !!!! The heat sink touch the cable and the cable may smelt...... Also need some space for the heat sink of ESC to release heat .....

(Actually, the MC230 is small.... may be my receiver is a bit large...(the old fashion KO one)

so.....

[ 本帖最後由 bigben 於 2007-5-11 10:30 編輯 ]