了解一下各位的M车..

my M-03 like that:
1 ) TAMIYA M03 with any Q body (now is 911 GT1 + GTR R34)
2 ) futaba S9550 servo / Old LRP ICS esc / ko KR-297FZ receiver
3 ) tamiya oil damper(old/pink one) / tamiya CVD /tamiya motor heat sink /xplode alloy front turn bucket/tamiya sport tuned motor/tech racing battery holder/local graphite damper tower plate(F/R)/ tires (TBC)
4 )many old things!!can't remember!!!

but not yet run!!!hehehe!!!!!

原帖由 雷公 於 2006-5-23 00:20 發表

雙星都有架
不過其實無咩用﹐因為HOLD住SERVO果個膠架都好軟

有好過冇啦...

原帖由 雷公 於 2006-5-23 00:20 發表

雙星都有架
不過其實無咩用﹐因為HOLD住SERVO果個膠架都好軟

我個 Servo Mount 係掃 o左牙 , 雖然車架個 servo 位都係膠, 好軟無咩用, 但都換埋佢算 lo ...

原帖由 警察 於 2006-5-22 20:01 發表
等我又晒下先....
1 ) TAMIYA M03-M SWIFT
2 ) ko 2143 servo / V16 digital esc / ko KR-297FZ receiver
3 ) tamiya TRF damper / tamiya CVD / tamiya ball diff / tamiya motor heat sink / tamiya 20 ...

嘩 ! 好補呀 !

Just finished building it, very original smell

1) Tamiya M03-M Swift
2) Futaba S3003 servo / Tamiya ESC (from the box) / sanwa reciever
3) Tamiya super modified 23T motor / Tamiya grip tyres with 26mm rims (not the original M series rims)
4) So far modified with my old parts from TL-01 and TA-04... $000 used...hehe

原帖由 dimsim8 於 2006-6-7 21:11 發表
Just finished building it, very original smell

1) Tamiya M03-M Swift
2) Futaba S3003 servo / Tamiya ESC (from the box) / sanwa reciever
3) Tamiya super modified 23T motor / Tamiya grip tyres  ...

小心 ! 我驚燒電變 !

原帖由 courel500 於 2006-6-8 13:26 發表

小心 ! 我驚燒電變 !

玩到五分鐘仔好彩
101overhit會cut 電   (有時唔會)hahahaha

just seeing  if the original ESC can handle bigger engine, i have tried the tamiya Mechanical Speed Controller MSC with the 23T motor, took a long time before it starts burning...