Speed passion Inspire RTR

SP Inspire RTR
ESC + JR motor

有無師兄知道個specification??
JR motor, 可以頂到幾大齒比??

thanks!!

噢...
可能無人用tim

SP個西又無spec.....

Motor Specification:
Input Voltage: 4-6 cell
Watts: 155W
RPM per Volt, KV: 3000 RPM/ Volt
Motor Size: 540
Shaft Diameter: 3.175mm
Rotor Performs: STD/STD (ROM/temp)

ESC Specification:
Cont. Current: 30A
Burst Current: 120A
Resistance: 0.005 ohm
Suitable Car: Car, Rock Crawler, 2WD Off Road
Suitable Brushless Motor: >17.5T (3000 brushless motor)
Battery" 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po
BEC Output: 6V/1.5A
Motor Type: Sensor less Brushless Motor
Diameter: 31.5mm x 27.5mm x 24mm (the hight of fan is not included)
Weight: 30g (Without wires)

thanks gary
咁我想知套BL可承受o既齒比
應該睇邊part? 或者點計??

咩黎架?

                               
登錄/註冊後可看大圖

FF02用緊套無刷

想改落部103用
但唔知個spec頂得住無

係咪同EC, YR個OEM廠

想改落部103用
但唔知個spec頂得住無
move7648 發表於 2009-4-1 16:21

                               
登錄/註冊後可看大圖

你當佢3000kV,30AESC咁睇啦,

你當佢3000kV,30AESC咁睇啦,
gary 發表於 2009-4-1 04:42 PM

                               
登錄/註冊後可看大圖

sorry, 我真係新手 "計gear ratio"....
請問3000kv, 可承受到幾大齒比??


其實, 有無咩reference, 可以睇到唔同motor (3000 / 4300 / 5700kv .... 等等) o既可用範圍呢

唔該晒!!