RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1528|回復: 4
打印 上一主題 下一主題
收起左側

c hing 有無玩緊 Novak HV Pro System Set / Hobby Wing 好盈 150A Set

[複製鏈接]
跳轉到指定樓層
1#
chacha 發表於 2009-12-9 10:28:43 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 chacha 於 2009-12-9 11:12 編輯

c hing有無 玩緊 Novak HV Pro System Set/ Hobby Wing 好盈 150A Set / 有感摩打

請問哪一個套裝電子變速比較合適 E-Maxx 如果原裝摩打齒,哪一個套裝比較好, 有無年代分別(如何分別年代) 優點??列舉細節 謝謝! 現時購買哪一個比較好, 唔該晒!

Novak
HV Pro Brushless System 4.5T with 5mm Rotor (Kv=5,000; Watts=890)
HV Pro Brushless System 5.5T with 5mm Rotor (Kv=3,700; Watts=800)
HV Pro Brushless System 6.5T with 5mm Rotor (Kv=3,400; Watts=730)
HV Pro Brushless System 7.5T with 5mm Rotor

                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


Hobby Wing 好盈
EZRUN-150A-SD Brushless ESC for 1/5 Car (Competition Race)

                               
登錄/註冊後可看大圖

Output: Continuous current 150A, burst current 1080A.
Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.  
BEC Output: 5.75V/3A (Switch mode built-in BEC).
Resistance: 0.0002 Ohm.
Motor Supported: Sensorless and sensored brushless motors
Suitable Brushless Motor: 6T and > 6T  
Suitable Car:  1/5 on-road or off-road cars / trucks for competitive race.
Size: 68mm(L) * 55mm(W) * 45mm(H).
Weight: 150g(Without wires)


                               
登錄/註冊後可看大圖

Output: Continuous current 150A, burst current 950A.
Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.  
BEC Output: 5.75V/3A .
Resistance: 0.0002 Ohm.
Motor Supported: Sensorless and sensored brushless motors
Suitable Brushless Motor: 4.5TT and > 6T  
4.5T以上(含4.5T),KV<=3000 (4 cells LiPo);
                            6T以上(含6T),KV<=2400 (6 cells LiPo)
Suitable Car:  1/8 on-road or off-road cars / trucks for competitive race.
Size: 58mm(L) * 46.5mm(W) * 35mm(H).
Weight: 150g(Without wires)

摩打

                               
登錄/註冊後可看大圖

XERUN-4274SL
2250KV
Diameter:42.0mm
Length mm (Without Shaft): 74mm
Shaft: 5mm
Shaft Length: 18.5mm
Weight: 385g
2#
kingman7788 發表於 2009-12-9 10:38:39 | 只看該作者
好就更係novak好,不過你簡得novak又唔介意有冇感的話,仲有其他選擇: Tekin , Mamba monster, Xerlorin都係好野~
我以前用novak HV pro 4.5r +原裝齒比結果溶電線燒電變 不過行洛好crazy下
3#
hardmankam 發表於 2009-12-9 11:40:53 | 只看該作者
For Monster trucks, you should consider Mamba Monster or Tekin system.  Choose a 1750kv range BL and run 6S Lipo.  Low KV @ High Voltage is more efficient, so less heat and stress on motor and ESC.
4#
powis 發表於 2009-12-9 11:53:53 | 只看該作者
if you can affort to buy novak system, i really suggest to pay a bit more to buy Mamba Monster or Tekin.  I have a bad experience and  feeling on Novak system now as i have an experience on burning ESC and always heard that it is easy to stop to operate due to over heat or some other reasons.  Again, just my personal opinion.  
5#
hardmankam 發表於 2009-12-9 12:15:13 | 只看該作者
From western sites, they actually like the HobbyWing 150A esc.  I am using one and is working very well. It is the cheapest 1/8 ESC on the market right now.  However, Hobbywing's motor is not very good.  They are very hot and the rotor may break apart.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-16 10:48 , Processed in 0.031269 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表