新車一問

最近新買左部awd，咩都未改
但係發現一個問題:
當離地時會見到有一個輪轉得無咁smooth
直頭差唔多停係到咁
折開睇過 應該係萬向同啤令之間或車輪之間
請間係未換金屬啤令之前係咪正常？

唔出奇，AWD既 bearings係好重要，特別係中軸同差速嗰四粒！

但係呢個問題應該同中軸過兩粒無咩關系
我覺得miniz四個轆既friction差少少就好易睇得出，唔同大車

但係呢個問題應該同中軸過兩粒無咩關系
我覺得miniz四個轆既friction差少少就好易睇得出，唔同大車
WallaceNg 發表於 2010-1-4 13:29

                               
登錄/註冊後可看大圖

我意思係你快啲換金屬啤令呀！

最近新買左部awd，咩都未改
但係發現一個問題:
當離地時會見到有一個輪轉得無咁smooth
直頭差唔多停係到咁
折開睇過 應該係萬向同啤令之間或車輪之間
請間係未換金屬啤令之前係咪正常？
WallaceNg 發表於 2010-1-4 13:00

                               
登錄/註冊後可看大圖

If you haven't changed anything, does it mean you are still using 8 plastic bushings at the 4 wheels? Did you also lock 1 or more or the wheels because you overtighten the lock nut(s)?

yes, im still using the plastic bushing, but i didnt lock the wheel too tight
cuz it still hv the same problem eventhough the wheel is out

Then there might be some problems with the differential(s).

Then there might be some problems with the differential(s).
billy86che 發表於 2010-1-4 16:43

                               
登錄/註冊後可看大圖

Maybe some dirt or wear inside!

i tried it also, the differential is all looking great. Clean and brand new

1. Are all the plastic bushings well installed? Did they come out a little bit?

2. Are you sure there is absolutely not option parts used?

3. Did you add a little grease into the differentials?

1. yes. no
2. surely not, becuz just bought it brand new
3. not yet, but i  exchanged the differential, it stills happen at the same place