T3 可裝齒差嗎?

上面問左一次, 再問下先
個珠差我裝左呔之後用手轉應該係算幾順, 之前話有少少 cake 住 既 feel 係用手輕力直接轉個珠差杯, 咁就 feel 到有少少輕微 cake 住既感覺.

其實一個運作正常既珠差, 係應該 "如絲順滑", ...
librayiu 發表於 2010-2-19 01:10

                               
登錄/註冊後可看大圖

正常系唔應該有cake住既feel的.....但正如你所講的輕微....咁就睇你接唔接受倒羅.....咁輕微應該影響不大的.......

正常系唔應該有cake住既feel的.....但正如你所講的輕微....咁就睇你接唔接受倒羅.....咁輕微應該影響不大的.......
bigman0712 發表於 2010-2-19 01:20

                               
登錄/註冊後可看大圖

我估計可能係我磨 2 塊片磨得唔夠滑, 或者係 d ceramic 珠 (top出品) 有 defect...
既然依家無牙差 option, 唯有繼續用同保養呢個珠差, 希望下次再執執佢時可以整到 100% 順滑!

35# mschumi

35# mschumi

IT SHOULD BE 34 PULLEY

35# mschumi

Sorry!!!!!!!typing error ,it should be 38 pulley

35# mschumi

Sorry!!!!!!!typing error ,it should be 38 pulley
rt476 發表於 2010-2-19 01:39

                               
登錄/註冊後可看大圖

why 哩?
VM II 係 38T 嘅咩?

why 哩?
VM II 係 38T 嘅咩?
mschumi 發表於 2010-2-19 01:53

                               
登錄/註冊後可看大圖

Atomic is a band name make a gear diff for X-Ray T-2 n T-3 used. I also heard the news from kws now they are under testing .......

Thx !!

diy!!!!!!!!!!!!!!

正正常常既野你唔用,諗埋D唔正常既野

今日再次拆個珠差出黎, 2 塊片打磨到立立令, 壓力啤令 clean up 過再從新上過油.
砌返好之後, 點知.... 都係 cake 住 cake 住...
因為用緊 ceramic 珠, 一路都 assume 佢係 "好襟用既", 無懷疑過佢. 之後我拎返包之前用過既綱珠, 換左上去試, 結果, 即時順晒...!
激死, 原來搞咁耐就係因為 d 低質 ceramic 珠, 等我仲以為 ceramic 好襟用, 原來都唔係...

which brand is this ceramic 珠? Thanks

"TOP".....

use rchobby  , I used one set for over 60 packs still super smooth!
http://bbs.rc-evo.com/forumdisplay.php?fid=82

rchobby? Do u mean those "no brand" self package ceramic ball from ball from Leo?

I just bought 12 pieces, with very good price.