Recommneded Servo for TT-01 ?

I am using Futaba 3003 servo now (the cheapest one . I wannna upgrade my servo.. any recommendation, ching?

有冇諗過俾幾多錢去upgrade?

Um... budget is not my problem. The problem is my skills.... top tier servo... no use for me. I only played for 2 months... but Futaba 3003 really no good....
I need a servo that I can handle, but also sensitive enough that I can enjoy racing. Thanks, ching !!

servo係值得俾錢落去既item,有budget梗係揀top level既servo好d啦
唔會話勁你就用唔著ga

Futaba BLS551
KO Propo 2413
呢兩隻短servos都好用

full size既可以諗下
Futaba BLS451
Sanwa SRG-BR


以上全部最少都接近$700

SAVOX......
呢隻都係好野黎~~~
個spec仲唔錯...
夠快夠力水，一樣都有low profile，
價錢都仲好合理，都可以考慮下，
^^~

futaba 3003有咩唔好?扭力唔夠

從未玩過 ching : 3003 is not very sensitive... it takes too long to react.
Noir.KAZE ching : What's the difference between 短servo and full size servo ? Just the size? or the functions are different? Thanks.
milkboy ching: SAVOX is a brand or what ar ?

Thanks all ching.

futaba 3003有咩唔好?扭力唔夠
從未玩過 發表於 3/5/2010 21:03

                               
登錄/註冊後可看大圖

慢車或放狗就唔覺，快車同入場玩就出事

從未玩過 ching : 3003 is not very sensitive... it takes too long to react.
Noir.KAZE ching : What's ...
singlau714 發表於 2010-5-3 21:48

                               
登錄/註冊後可看大圖

我冇玩過短servos唔清楚
以上4隻spec差唔多
最快果隻2413同其他3隻個速度都係差0.2sec咁上下
最好力都係差2-3kg-cm

所以應該差唔多
除左2413唔知係唔係BLS之外......
其他3隻都係BLS(BRUSHLESS)既servos

Do I need BLS motor and BLS speed control to use BLS servo?
Now.. I am only using Team Power "Black Pig".

Do I need BLS motor and BLS speed control to use BLS servo?
Now.. I am only using Team Power "Black ...
singlau714 發表於 2010-5-3 22:01

                               
登錄/註冊後可看大圖

servo唔關事,放心啦
但係你有冇打算upgrade埋套控?

爽好多wor XD(落毒中)

ha... no need 落毒, ching. addicted already !!
I just bought futaba 3PM... that's why thinking about servo... ha..

ah... btw... futaba not always the best brand right?? becoz i see most ching use futaba.. for servo and for remote.

比較可靠
同一價錢,大家差唔多,Futaba俾人感覺可靠d
btw,我自己用Sanwa,哈哈
3PM ok wor,2.4G?

yes ar. 2.4G. 2nd hand. Just got it few days ago. Not try yet.
I will go to kws to check out the servos on wed !! Will ask you more questions after that la..
Thanks so much !!