Need advice for Xray X10 link

aihan · 發表於 2010-5-3 14:55:46

遊客登錄

您需要登錄才可以下載或查看，沒有帳號？新玩家註冊

x

C hing pls advise gearing for X10,
I have 9T and 10.5T motor which spur gear you recommend for driving in PYC.
Also need advise for setting.
Thanks!

hardmankam · 發表於 2010-5-4 10:32:43

Are u running 1S or 2S lipo?

aihan · 發表於 2010-5-4 11:32:14

Running 2S lipo

hardmankam · 發表於 2010-5-4 13:27:18

2S + 10.5 on a 1/10 pan car is super fast!
what is the diameter of the rear tire?

hardmankam · 發表於 2010-5-5 10:33:45

Assuming you have 60mm rear tires, you can try 27/100 and have a rollout of 50mm/rev.

check your motor temp after 2 minutes. if the motor is not too hot, then you can gear taller. if too hot, gear shorter.

aihan · 發表於 2010-5-14 12:13:59

Thanks for the advise brother.

		自動登錄	找回密碼
密碼			新玩家註冊