Hyperion 新 firmware

唔同款都有得update woh~ :
http://media.hyperion.hk/dn/pc/pcsoft.htm

Good,thx

想問吓同舊嘅VER.有咩分別,小弟係用緊EOS0615I DUO3
THX

回復 3# rt476

info from Hyperion:
http://media.hyperion.hk/dn/pc/eosfw.htm

firmware:
v4.3
* Enables EOS PC Control and Data Suite Software!
* Adds adjustable terminal voltage for PB (lead-acid charge)
* Adds FLOAT MODE to PB charge
* Changes PB Charge to true Bulk/Absorption/Float charge model (float optional)
* Adds OFF setting for PB Safety Timer (must be OFF for continuous FLOAT MODE)

v3.2  (the first fw update release for hardware v3 NET & DUO)
* Added Terminal Voltage Control Function (TVC). You MUST read this EXPLANATION before using TVC!!
* Changed Cooling Fan control such that the fan is stays on if case temp exceeds 45C, until falling below 40C.
NOTE:  EOS Insight Logging Software must be version 1.5.0.46 or later if using v3.2 NET/DUO firmware.


EOS CONTROL & DATA SUITE (ECDS) for Windows PC
ECDS Enables:
* Full Control of the Charger Via PC
* Editing/Storage/Uploading of Memory Positions to/from Charger
* Rich Data Logging features
* "Tagging" of packs for long-term analysis
* Customizable Alarms
* And more.....

我覺得好似個電腦軟件介面分類清晰左:

登錄/註冊後可看大圖

Tks a lot ching................

正, 今晚可以試試, 唔該晒c兄!

有冇師兄用緊 DATA SUITE 果 Software? 有乜作用?

有冇 ching知用Hyperion义电(5000mah),要用幾多C去义呢?因有 1-5 C選.
Thx

回復 8# samuel20461

c hing 呢d係mannual度copy 出來的:
http://media.hyperion.hk/dn/eos/EOS0720NET3-MAN-EN32.pdf

"Charging Lithium Polymer in Excess of 1C Rate (3.7v Nominal LiPo types):
LIPO MAX C – Under USER SETUP menu you will find a setting to allow setting of Maximum “C” charge rate for Lithium Polymer (3.7v/cell type) batteries, with options of 1C to 5C (2C is Default). Note that MAX C attainable will depend on the Amps Max and Watt Max rating of your charger, and pack capacity/voltage. NOTE: It is entirely YOUR responsibility to determine the SAFE Max C for your LiPo pack.
HYPERION original LCL, LCX, LVX, LVZ types 2C max charge rate.
HYPERION GENERATION 3 25C/35C packs, 5C max charge rate.
HYPERION GENERATION3 5C Rx packs, 4C max charge rate (20C Rx packs, 5C max charge).
HYPERION SWIFT G3 CAR PACKS - 5C max charge rate (ALL Swift Car packs ever produced support 5C rate, regardless of 2C charge cautions appearing on first-production packaging).
If using other than Hyperion lithium packs, consult your battery’s documentation for allowed C rates, before exceeding 1C charge rate. If you don’t know the allowed max CHARGE rate for your pack, never exceed 1C rates."

有新款差機出, 又出了新的firmware V4.7:
http://media.hyperion.hk/dn/eos/

今次的 software (ECDS) 也update了新version, 而且介紹更清晰:
http://media.hyperion.hk/dn/pc/ecds-man/index.htm

個charge statistics圖表幾得意~

唉…！唔識攪，小弟部6010 DUO仲行緊V1.0

回復 11# 清清

師兄, UPGRADE之前要睇清楚, 部DUO有分: DUO,DUO2, 同DUO3。