Tekin RS pro 一問

小弟剛剛買左個Tekin RS pro 想問問係咪要加個電容,如果要可否告知牌子同形號.謝謝

小弟剛剛買左個Tekin RS pro 想問問係咪要加個電容,如果要可否告知牌子同形號.謝謝
LFY 發表於 12/5/2010 15:59

                               
登錄/註冊後可看大圖

用返原裝個粒就ok
....

但係原裝好像冇跟個喎,要響邊樹買架

但係原裝好像冇跟個喎,要響邊樹買架
LFY 發表於 12/5/2010 16:14

                               
登錄/註冊後可看大圖

   有wor, 跟粒細既電容

New Box should have 1 cap included.

But, I use 3 x 1000uF 16V 105C caps.

New Box should have 1 cap included.

But, I use 3 x 1000uF 16V 105C caps.
hardmankam 發表於 2010-5-12 16:16

                               
登錄/註冊後可看大圖

有冇咁既需要呢?

因為我都用緊跟機果粒?

唔該曬咁多位師兄,我會再找清楚

New Box should have 1 cap included.

But, I use 3 x 1000uF 16V 105C caps.
hardmankam 發表於 2010-5-12 16:16

                               
登錄/註冊後可看大圖

Have more burst power??

Tekin recommends:
Stock racing: 1 Cap
Mod racing: 2 Caps

But I find:
Tekin's Cap is 330uf
Novak's Cap is 5000uf
SP's Super Cap is 1500uf

So i just take the average of the 3 ... about 2000 - 3000uf

anyway, also buy high-quality low-ESR caps.  
low-ESR = fast charge and discharge

One more comment:

Its better to use 3x1000uF than 1x3000uF,
since it is faster to fill 3x1000uF (in parallel) than to fill 1x3000uF.

I hope I am right on this one.

唔好意思咁多位師兄, 可否教教小弟ABC應該答咩顏色?( 紅, 黄, 藍 三色 SP V3 motor) 謝謝

回復 11# LFY

colour無關係影響,最緊要係唔好插錯