TT-01 option part?

Hello every-ching,
i recently bought a TT-01 and i want to upgrade the car to so call full option, wt part should i buy?

TT01 唔好放太多金錢落去改, 因改極架車既性能亦唔會點提升...
當然有一D BASIC 既PARTS 就一定要換啦,
例如BEARING, 金屬中軸, 頭萬向, 快齒, 尾2度TOE-IN 杯 & 油壓...
記住買TAMIYA, 其他牌子就唔好啦......

oo i see, how much do i need to spent on those option?

TT01 唔好放太多金錢落去改, 因改極架車既性能亦唔會點提升...
當然有一D BASIC 既PARTS 就一定要換啦,
例 ...
lung1 發表於 2010-5-31 23:26

                               
登錄/註冊後可看大圖

    仲有份金屬轉向

仲有份金屬轉向
alvis425 發表於 1/6/2010 01:40 AM

                               
登錄/註冊後可看大圖

唔需要改都OK, 用tt-01 E 個份已經無咩虛位

唔需要改都OK, 用tt-01 E 個份已經無咩虛位
lung1 發表於 2010-6-1 01:47

                               
登錄/註冊後可看大圖

不過要睇下對應咩SERVO 如果用返星星果個SERVO SAVER 好搞笑
佢裝完之後唔係90度黎 可能要用返D可以較果D 黎就返個SERVO 中位

如果個控較到就可以慳返

just bought the option part, but after install the "front uni-way", i can't apply brake on the front wheel, that make it like locking the rear wheel and it's no good, should i replace it back to normal?

tt-01加2~3個8mm介子就唔容易掃牙啦  5.5t都走得

回復 8# KANCHI


    放在那裡呢?

just bought the option part, but after install the "front uni-way", i can't apply brake on the front ...
Sam_online 發表於 2010-6-1 16:19

                               
登錄/註冊後可看大圖

This is the characteristic of front one way.