TA03F還陽計畫

在下十年前買左架TA03F
加上LRP INDY600及摩打後~~~
就一直好少玩...
已知嘅係...波箱有D掃~~~
皮帶老化左~~
四隻腳..全隻都要執~~
現下最想將佢變成FF戰車~~

回復 kevin-ysl 的帖子

I think the most problem on ta03 is the suspension!!! swing arm too soft!!

suspension的確係全死~~~
最近比我起"RC乜"見到有套suspension連swing arm套餐~~~
唔知啱唔啱~~~不過都應該扑得過~~

回復 kevin-ysl 的帖子

Alloy swing arm!!!! I don't like them. It is good if you never crash your car!!!!I prefer nylon or derlin.
Alloy C-hub and steering knuckle would help a little bit, Yeah raXing parts are good in quality.
But the problem is the original design of ta03 suspension is bad!!!

回復 chowhungjai 的帖子

THX師兄~~但可惜而家搵隻原裝嘅都困難~~~
比我搵到有賽鋼一定拍晒手掌~~~
另外如果我想番新個牙箱~~
同一個網店有另一套齒賣...
請問是否合用???

kevin-ysl 發表於 2011-5-24 22:35

                               
登錄/註冊後可看大圖

回復 chowhungjai 的帖子

THX師兄~~但可惜而家搵隻原裝嘅都困難~~~

參考吓........乜原裝避震好差咩，噤用TRF避震唔差喇掛？搖臂軟？噤當時David Jun又可以攞冠軍?

回復 小龍 的帖子

the original damper of ta03 has no problem, they works fine, but the problem is the geometry of the suspension and those soft plastic swing arms. This is the common problem on ta01, ta02, ta03, tl01(tl01la better) and those M series. I don't like their original swing arms.

仲有呀，可以同代理定呀，雜廠零件唔見得好過原廠。
http://www.tamiya.com/japan/prod ... _id=50704&col=6
http://www.tamiya.com/japan/prod ... _id=50701&col=6
http://www.tamiya.com/japan/prod ... _id=50698&col=6

回復 kevin-ysl 的帖子

I know derlin or nylon swing arms is almost impossible to get. I am trying to put on kyosho swing arm on my ta03, if I sucess, I let you know!!

回復 小龍 的帖子

David Jun 是 David Jun嘛!!!
阿Ching 其實你知覺吳知你架車塊二樓板是ta03r用的，亦想請教下一吳知你架重有咩需要改？

chowhungjai 發表於 2011-5-25 01:27

                               
登錄/註冊後可看大圖

回復 小龍 的帖子

David Jun 是 David Jun嘛!!!

無嘢改。

回復 小龍 的帖子

魔打熱吳洗理！由於ta03的先天不足，D膠圍住哂個魔打，魔力打散熱係一個必要解決的問題！

小龍兄呢架 TA03 我諗祇作神交

張相應該响08年影，都神交咗好多年囉，講到摩打散熱真係火都黎呀！以前玩有刷細d turn 數都cut車呀！人地玩20分鐘，我就只得三個字。

經典