TT01 DIY with Kawada Spur gear and adjustable motor mount

[url="]Spec :
HobbyWing 60A, 5.5T motor, 64P 88T Spur gear, 37T motor gear
ride height front 5mm, rear 6mm
front toe out 0.5
rear toe in 2
camber front -1, rear -1.5
TRF damper with yellow spring at front and rear
Sorex 40R tire
lipo SMC CMAX extreme 6000mAH 60C

With above spec, this TT01 achieved 18 sec average lap time at JV, best lap time is 16 sec. The lipo last 8 mins without over discharge.

登錄/註冊後可看大圖

係味打英文 冇人回==

I have also used tb03 spur holder to use 64/48 pitch gears.  Its much stronger than original tt01 gear.

you have a good idea on the motor mount mod!  thanks for your sharing!

is there any tb03 spur holder sold separately? Thanks!

咁樣改裝，調教摩打，會唔會比較麻煩？

hydrogen9999 發表於 2011-9-16 00:40

                               
登錄/註冊後可看大圖

is there any tb03 spur holder sold separately? Thanks!

Yes, there are many in rcmart
here is the link
http://www.rcmart.com/catalog/rc-tb03-tamiya-aluminum-spur-gear-mount-54094-p-28272.html?cPath=595_744_1229

chacha 發表於 2011-9-16 02:38

                               
登錄/註冊後可看大圖

咁樣改裝，調教摩打，會唔會比較麻煩？

吾會架！反而好方便換齒比 同一眾頂級車調教方法一樣

ching...我比我部tt-01 E你整得唔得?

Gd info ching!!!! Thanks very much!!!
But can Ching tech me how to modifi the spur gear if I need follow your method!!!
( sorry my English isn't good enough....)

咁樣整左之後一樣會掃牙，只係好在可以用普通 spur 同不限齒比...

tt01 問題出係條軸同摩打座唔係一體，用耐左有虛位就會郁...