TB EVO 5 setting 一問...

gavl 發表於 2012-4-19 14:54

                               
登錄/註冊後可看大圖

隻珠差頂到4.5T 既威力，勁！但想知頂到幾多排電？

用膠既珠差都完全冇問題，
不過玩五排電左右就要檢查下個珠差有冇返鬆

I use SD LCG to race 9t in brushed age. No issue at all!!!

回復 車仔同學會 的帖子

Ching,請問摩打直放引致Brake個時車身不平的問題可以點解決?
(我玩TB evo5 +5.5T motor)

totimothy 發表於 2012-4-20 11:34

                               
登錄/註冊後可看大圖

回復 車仔同學會 的帖子

Ching,請問摩打直放引致Brake個時車身不平的問題可以點解決?

小弟技術差，唔識用break

回復 totimothy 的帖子

Yes! Are you using front spool or one-way? Any car will have a chance to spin when braking. It's all depends on your car setting and the how is the grip will be when accelerating or decelerating. Shaft drive car will have a torque what cause the car to roll. The smoother the drive train it has, the less roll it will be. So shaft drive car will have higher chance to get uneven grip on left and right. In the case of using one-way, as there is only 2 wheel effective when braking, uneven grip will become significant and cause the car spin. BTW, we usually not using brake when run with one-way!

SPEC R 出比 TB03 果隻牙差買吾買得過? 聽講可以裝落 TB EVO 5

想玩下牙差、但 SPEC R 好似吾太耐用啵...

回復 f-16 的帖子

how much?我都諗住換牙差,不過除左SPEC R仲有咩牌子?

我都想知...