50095 Team Corally Red Series 9.5T Brushless Motor + BMS ESC 鋁盒 Combo Set
50135 Team Corally Red Series 13.5T Brushless Motor + BMS ESC 鋁盒 Combo Set
The extremely powerful Team CORALLY RED SERIES brushless motors have been designed by using the very latest in brushless technology. The high power magnet rotor in combination with a special designed stator offers ultra high RPM with super smooth power control. The rotor is dynamically balanced with the highest precision for low vibration and efficiency. The stator uses super tight multi twisted wire to ensure a perfect electro-magnetic balance and minimum loss. The star wound stock motors give the unparalleled power of approximately 280 watt for the 13.5 turn and 400 watt for the 9.5 turn motor!!
-Extremely powerful brushless motors through ultra high RPM.
-Super smooth power control and high efficiency.
-The fully aluminium can and endbells offer maximum cooling.
-No heat building motor stickers are used but exclusive and super hot appealing printing directly on the can.
-ALSO AVAILABLE WITH CORALLY BMS ESC AS COMPLETE BRUSHLESS SYSTEM. THE MOTOR & SPEEDO COME SECURILY PACKAGED IN LUXURY ALUMINIUM STORAGE CASE.
TEAM CORALLY RED SERIES – STOCK MOTOR SPEC
Part #
Motor
Type
Winds
Winding
Type
Max.
Power
RPM
Per Volt
Voltage Range
Approx. Weight
Total Length
Can Length
Can Diameter
Magnet
Type
397095
RED Series
Sensorless
9.5 Turns
STAR
400 Watt
4.100
6.0 ~ 7.4
166 g
65 mm
50.5 mm
36 mm
Sintered
397135
RED Series
Sensorless
13.5 Turns
STAR
280 Watt
3.000
6.0 ~ 7.4
161 g
65 mm
50.5 mm
36 mm
Sintered
TEAM CORALLY BMS – ELECTRONIC SPEED CONTROL FOR SENSORLESS BRUSHLESS MOTORS:
The Corally BMS electronic speed control for brushless motors is designed to offer durable power and efficiency. It uses trouble-free sensorless technology and features lightweight design & compact size without needing additional condensers or capacitors. It is easy to install, user friendly and comes with pre-installed high power connectors. It also features automatic cut-off, automatic neutral setting, automatic battery type detection, automatic high temperature protection and fail safe mode.
-Input voltage : 7.2V (Ni-Cd & Ni-MH) – 7.4V ~ 11.1V (Li-Po)
-Output – Power IC Spec : 54A at 25°C – 45A at 100°C – 300 Watt continuous
-Minimum motor winds : 13 Turn Delta / 8.5 Turn Star
-Weight : 45 gram (Including wires & plugs)
-Size : 50 mm x 26 mm x 16.5 mm