請教拆船殼

請教各師兄拆修咸頓船面,因我拆了船面13粒鑼絲都不能起出船面   THANK'S

登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

C-HIng:

There are 14 screws and their positions are shown above.
My pic is as reference only and Do this at YOUR OWN RISK!

fy789 發表於 2014-8-10 04:49
C-HIng:

There are 14 screws and their positions ar shown above.

唔該晒 fy789師兄

All C hing,

I have the same problem to open the boat body. My Southampton is 2.4G one and cannot release the body even those 14nos. screw off. Is there any sequence to release the body?.  

船款都幾靚喎。搞到我心思思⋯⋯

lykm2003 發表於 2014-8-10 18:31
All C hing,

I have the same problem to open the boat body. My Southampton is 2.4G one and cannot re ...

1. After you take out the 14 screws, remove the 2 deck opening
covers (one under the superstructure, and the other is near
the tail.).

2.  One hand hold on the hull, and insert the fingers
of the other hand to pull on the deck openings in opposite
direction using some force. The deck ad the hull will be separated.

The first time to take out the deck is difficult due to the water-proof
thin foam tapes on the interface of the hull and the deck.

Hope this helps!

Thanks C Hing, will tried in this weekend

恭喜 Ching
我都入了這船，在計劃升級外觀中

努力努力！

HobbyEngine Southampton is an excellent entry-level boat for all Chings !  

fy789 發表於 2015-1-25 05:46
HobbyEngine Southampton is an excellent entry-level boat for all Chings !  :lovel ...

呢架野都唔平wor. 差唔多要成$260usd一架.

hkboy1668 發表於 2015-1-25 15:08
呢架野都唔平wor. 差唔多要成$260usd一架.

http://www.squadron.com/1-36-Hobby-Engine-Southampton-Tug-Boat-p/rhe0701.htm

USD225 + FREE shipping

Squadron is located in Texas, so no sales tax to California