Sakura XI Sport Set車問題

你好，小弟是新手，有D關於Set 車問題，請CHING 指教一吓.

已買了:
*Yeah Racing (#MG-48030) Aluminum 7075 Hard Coated Motor Gear/Pinions 48 Pitch 30 Teeth     
G.T. Power 7A 80W AC DC Dual Power Balance Charger Discharger (Built-in Power Supply) #C607D     
3Racing Sakura XI Sport 1/10 RC Touring Car #KIT-SAKXI-S     
SKYRC Cheetah 1/10 60A Brushless ESC System Combo w/ Sensored 2590KV 13.5T Motor / Program Card #SK-     
Sanwa MX-V 3Channel 2.4Ghz FH2 Radio w/RX-37W Waterproof Receiver #101A30874A     
Power HD High Speed Digital lineary Servo 6V 7KG 0.06Sec For 1/10 RC Car #DS-1206TG
Spped Energy 5400MAH 40C LIPO 7.4V Battery

1) ESC Program Card, 點用？ ESC 的手冊很小資料. 請分享ESC & Program Card 的 setting (for JV 場)
2) Battery And Gear 的比例 點計算 ?
3) XI Sport 各種Linkage arm長度的 setting

感謝!

Follow factory setting for Linkage arm長度的 setting, and adjust camber, toe etc.
For esc drag brake set according to what u like, i like maybe 10-20%
search online for other SKYRC esc instruction la, there is a lot i looked at before

你用60A電調會易過熱再加上用13·5縻打，
要用120A先得
玩得13·5縻打就要電池的C數要6－70C以上先可谷得起。

13.5T gear ratio
38/19 * 85/ motor gear = 6.2 around

Play Jv touring use 4.5-8.5t better
新手也可試4·5T，收細或關了TURBO亦得
慢跑渣熟線位。

Linkage 長度跟說明書指引便可
或上架set camber 1度

請問camber angle前後輪是否set相同度數,還是有分別?

lyyung 發表於 2015-6-25 00:10
請問camber angle前後輪是否set相同度數,還是有分別?

沒有一定角度，應下地後按行走情況而調整。