Question about Spektrum

I got a problem about the Binding Process of Spektrum 2.4G.

I followed the manual as follows:

1. Turn on the receiver while pressing the bind buttom.
2. Then turn on the transmitter while pressing the bind buttom

So bad, the receiver's LED just keep on flashing but no response.

Any brother can tell me the above step is correct or not. If not, please tell me the proper way.

Thanks !!

Set the transmitter to PPM mode and try again

                               
登錄/註冊後可看大圖

thx for your suggestion.

I am now using M8 & it is FM.

Second hand or brand new?

brand new.

中文

1). 按住receiver個制唔好放開手然後開電變開關, 個receiver會閃燈, 然後立即按住module個制唔好放開手然後開搖控開關, 然後等大約幾秒, 個receiver 和module 既燈會一齊亮起唔會再閃, 咁就已經binding 成功.  我新買時都搞左好耐先得, 祝你好運

Thanks a lot !!