Help!! Gear ratio of Novak 10.5r brushless in 1/10 touring TA05

Any bro can help, what is the gear ratio of Novak 10.5r brushless in touring car TA05,,, I am now using from 7.0 to 6.06 but still not running well.   Any bro can share your experience!!  Thanks !!

我架TA05MS用LRP 10.5配鋰電,齒比6.9都OK快.

Novak recommands a ratio of 5 - 5.5FDR for rubber.

I'm running 5.3FDR now with great result

Thanks all bros, I think its my batteries problem, I will start with 7:1 again!!  Cheers!!

原帖由 星野一義 於 2007-12-15 13:29 發表

                               
登錄/註冊後可看大圖

我架TA05MS用LRP 10.5配鋰電,齒比6.9都OK快.

喂星野，比張相嚟睇吓呀。

BTW，你架IFS依家個look

最想知你點安舊LiPo同落幾多鉛，Thank You

我係新手,搭單問下各位,ss10.5r 用5.5 fdr 怕唔怕有過熱問題?我好怕有問題,我個車係 ta05ms
還有個問題想問下,無刷個系統係唔係brake 唔死架車?定係我個車有頭單所以難停架車?
唔該各位

頭單所以難停架車..........this contributes cos your two front wheels are unbrakable.

Brushless motor also contributes cos there is no direct contact inside the motor.

You may change your driving habbit or increase the %drag brake os the ESC to solve the problem

原帖由 Brushless 於 2007-12-16 12:08 發表

                               
登錄/註冊後可看大圖

喂星野，比張相嚟睇吓呀。

BTW，你架IFS依家個look

我又影張相先

嘩，好似樣

用LiPo落咗幾多鉛呀？！！

原帖由 Brushless 於 2007-12-16 12:14 發表

                               
登錄/註冊後可看大圖

最想知你點安舊LiPo同落幾多鉛，Thank You

我用膠紙安舊電及無加鉛 Thank You

原帖由 星野一義 於 2007-12-17 00:22 發表

                               
登錄/註冊後可看大圖

我用膠紙安舊電及無加鉛 Thank You

Nice car, very blue!!  

Need to add alot of weight for Lipo.

I run my Novak 10.5 with 5.3FDR, very fast and motor not hot!

                               
登錄/註冊後可看大圖

原帖由 pchan0 於 2007-12-17 11:52 發表

                               
登錄/註冊後可看大圖

Need to add alot of weight for Lipo.

I run my Novak 10.5 with 5.3FDR, very fast and motor not hot!

                               
登錄/註冊後可看大圖

WWWWah, nice car.....

Finally I find out the reason why my motor was getting hot, it was because the motor gear was too tight!!!  Any tips for the motor gear installation!!  Thanks