3racing TA05IFS 碳纖維底板

原帖由 sch 於 2008-7-1 11:26 發表

                               
登錄/註冊後可看大圖

我終於可以寫到中文字
千其唔好買,你講得對,佢D位完全唔掂,佢D位完全唔fit,
由其電位,頂住centre pully,要張舊電推出小小至唔頂.
裝後完全不知所謂.
唔好買
去買個混碳兜好過

真係好似你講咁，去買個混碳兜好過！！

原帖由 anes 於 2008-7-1 12:29 發表

                               
登錄/註冊後可看大圖

I also use 混碳兜 for IFS.

3 Rxxing has downgraded to the level of GXM / GPX / XPM.

"HK' s Square" ...................... just kidding

3 racing 竟然想同 Square 相提並論.......似乎不可能......

原帖由 edmondhk 於 2008-7-1 11:13 發表

                               
登錄/註冊後可看大圖

咁普通05果份呢?
有冇師兄用過?

用過,啲位都係差少少,中間PULLEY 個位自己執先岩位

poor ringo fell from heaven to hell within a few days,

and he spend >$500,

with that $500 and the money to buy IFS + hop up >>>>>> enough to buy most of the top touring car, even with one additional LiPo battery

五百幾仲要自己執手尾?

死得 la..........................

啱啱先買左部IFSR,可以唔駛考慮,即刻砌車

唔係呀
我果陣用TA05果份完全冇問題
只係車架比較軟

I bought it
but seems ok wo...