珠差問題

請問我頭珠差好緊,尾珠差好鬆<-----ta05車
ta05是我架車打白鴒轉的原因嗎

No.  尾珠差好鬆 is fine, but also need to be smooth.  Time to clean up.

原帖由 GigaRacer 於 2008-10-29 00:32 發表

                               
登錄/註冊後可看大圖

No.  尾珠差好鬆 is fine, but also need to be smooth.  Time to clean up.

但係我架車車頭珠差,扲左邊條胎,左邊胎同後邊2條胎一齊轉
我都想知咩事
會唔會車頭真係太緊呢
好慘慘呀

hold the belt when you turn the wheel.  
車頭太緊 will understeering, not 打白鴒轉

yes, also need to pay attention to the choice of tires, camber angles, shock absorber setting...................... very troublesome?!!! yes, this is RC

if you don't know what to do, take the car back to the shop you bought it, the "see fu" will immediately diagnose the problem

最後一個問題呀
我現在個頭珠差,左邊一面向上轉,另一面唔識轉係珠差壞嗎

原帖由 鐵老人 於 2008-10-30 23:36 發表

                               
登錄/註冊後可看大圖

最後一個問題呀
我現在個頭珠差,左邊一面向上轉,另一面唔識轉係珠差壞嗎

拆散佢砌多次...

哈哈,即是頭珠差有問題啦

有少少心思思想換頭單

fix your 頭珠差 first

Use front one-way will make it more easy to  打白鴒轉

Fix one thing at a time.

原帖由 GigaRacer 於 2008-11-1 13:02 發表

                               
登錄/註冊後可看大圖

fix your 頭珠差 first

Use front one-way will make it more easy to  打白鴒轉

Fix one thing at a time.

睇來都要整返個珠差了