For sharing: My 4WD 1/8 油改電 Buggy

Here is my 1/8 brushless conversion buggy ... the eMatrix.
Using hobbywing 1/8 brushless 150A + 2350kv motor, running 4s lipo.
Homemade motor,esc, battery mount. (will upgrade later)
11T pinion, 46T spur.
Acceleration and top speed is very fast!!!

Very nice

師兄, 如果你會落Track飛Jump (e.g.: TRC), 就要小心, 我見你個電箱未必夠力支撐排4 cells, 我部用左Novak 套Kit, 享TRC順jump試圈, 走左6~7個圈就爆電箱, 排電就走左出黎, 排4 Cells塊PBC斷左, 唔敢再用, 排電只係第一次落地就無左. 所以要小心.

之前

                               
登錄/註冊後可看大圖

改左

                               
登錄/註冊後可看大圖

多謝 MacUser 兄意見,我會加勁力魔術貼.

正~~ 油改電後感覺好整潔, 好高興又多個TKO brother玩"mean green machine"

幾時拎黎同我地片過~~~

想問問由油轉電
total要使幾$$
like motor, ECS, motor mount, Nipo Battery,.......

原帖由 GOLDWING1800 於 2009-2-10 16:26 發表

                               
登錄/註冊後可看大圖

想問問由油轉電
total要使幾$$
like motor, ECS, motor mount, Nipo Battery,.......

Hobbywing 1/8 ESC + motor: ~ $13xx
Mod 1 Pinion: ~ $6x
Lipo Battery 4s: from $3xx to $6xx (depends on brand)
Motor Mount: DIY ~ $0
(commercial product about $8xx)

I spent about $1800 on my conversion.

原帖由 tatame 於 2009-2-10 15:55 發表

                               
登錄/註冊後可看大圖

正~~ 油改電後感覺好整潔, 好高興又多個TKO brother玩"mean green machine"

幾時拎黎同我地片過~~~

I like electric brushless... very powerful and environmentally friendly.  hope i can come to TKO this / next Sunday.

我架8IGHT - E 用NOVAK HV-PRO + 6.5T (3,400KV), 3s Li-po 11.1V, 12T pinion, 45T spur 係TRC/TKO都狂野到不得了

請問摩打坐是否diy的呢?

原帖由 dicksonlai 於 2009-2-10 19:32 發表

                               
登錄/註冊後可看大圖

我架8IGHT - E 用NOVAK HV-PRO + 6.5T (3,400KV), 3s Li-po 11.1V, 12T pinion, 45T spur 係TRC/TKO都狂野到不得了

點解你部E要用Novak? 原裝套BL唔得咩?

原帖由 hardmankam 於 2009-2-10 19:06 發表

                               
登錄/註冊後可看大圖

Hobbywing 1/8 ESC + motor: ~ $13xx
Mod 1 Pinion: ~ $6x
Lipo Battery 4s: from $3xx to $6xx (depends on brand)
Motor Mount: DIY ~ $0
(commercial product about $8xx)

I spent about $1800 on my  ...

請問你買隻Pinion Gear係咩牌子? 是鋼嗎? 我買過隻SpeedPassion, 是鋁加硬, 不過唔夠一排電就掃, 隻原裝大餅就花都無花.

師兄你架野好正喎

原帖由 MacUser 於 2009-2-10 23:26 發表

                               
登錄/註冊後可看大圖

點解你部E要用Novak? 原裝套BL唔得咩?

因為我用8IGHT + Losi Conversion 改,所以用NOVAK
Pinion 用NOVAK Bore Steel MOD 1

原帖由 hardmankam 於 2009-2-10 19:06 發表

                               
登錄/註冊後可看大圖

Hobbywing 1/8 ESC + motor: ~ $13xx
Mod 1 Pinion: ~ $6x
Lipo Battery 4s: from $3xx to $6xx (depends on brand)
Motor Mount: DIY ~ $0
(commercial product about $8xx)

I spent about $1800 on my  ...

睇見架車狂野嘅跑姿 ~ 無價

原帖由 MacUser 於 2009-2-10 23:30 發表

                               
登錄/註冊後可看大圖

請問你買隻Pinion Gear係咩牌子? 是鋼嗎? 我買過隻SpeedPassion, 是鋁加硬, 不過唔夠一排電就掃, 隻原裝大餅就花都無花.

我Pinion Gear 也是 Speed Passion. 麻麻地.
好的Pinion 要用 Tekno (teknorc.com) or Novak.

咁樣同買副新偈差唔多喎........very good