Motor for TA05

C-hings,

I'm planning to buy a new motor.
Anyone know that the max. T of motor could be used in a original TA05 (no modification) without damage to the car?

Thanks!

23T.....

10T

upgrade to Hobbywing 35A or 60A 9T package.

Original front ball diff? 23T brushed or 4000kv brushless would be the "max".
If you want more speed, you need the front direct solid, only HK$120, but run forever. Then you can "think" about 5.5, 4.5 brushless.

Thanks! C-hings.

I never know the original TA05 (no modification) can support the 10T motor.
Meanwhile, what mean by 'Original front ball diff' and 'front direct solid'? I'm a new comer.
Thanks!

原厂珠差既珠差杯係用膠造,玩快車好快熔,快過4000kv無刷的話車尾最好換金屬珠差杯,車頭就換頭直軸或換金屬珠差杯,不過建議用頭直軸,唔洗整咁多野同維修.
基本上TA05係好硬浄,set得好其實唔洗大改都幾好跑,邊樣爛左或磨损左先至改邊樣都得,除左珠差...

Many thanks! 200sxsr20
Thank for your very helpful and details suggestions.

Meanwhile, if I buy the new motors (say 15T & 17T), how could I check out the 摩打齒數?

7# 200sxsr20
膠珠差杯頂到有刷11t嗎?

Hobbywing is good choice,