唔識set一支控兩架車呀~

我用緊3pks, 有兩個modules(唔知咩 603xx fasst咁上下), 但我已經張兩架車既setting save做兩個 memory, 但我發現如果我兩架車同時開住時, 個控可以同一時間控制住兩架車, 我已經睇晒instruction但搵唔到邊度講, 請問點樣可以分返開佢地, 我驚我帶兩架車出街,有架唔記得off 時就大獲@@, thanks~

理論上會"大獲" , 但實際上唔會. 因為唔會0玩緊一架車同時張另一架車接電. 同埋你一郁. 你已知另一架車跟住郁.

因為我通常帶一架電一架油@@
仲有我成日真係唔記得off部車的~~

咁即係帶漏左個腦啦

因為我通常帶一架電一架油@@
仲有我成日真係唔記得off部車的~~
rabbitmomo 發表於 24/11/2009 14:43

                               
登錄/註冊後可看大圖

呢D野唔應該會錯..
玩完車關電變, 拔走個電插 跟住到最後先熄控...........

咁就要改下la

咩都唔洗改-0-!~改下你個習慣就ok!~就係玩完記得off左架車!~

ohh, thanks ching, hehe

ohh, thanks ching, hehe
rabbitmomo 發表於 2009-11-24 18:34

                               
登錄/註冊後可看大圖

ME

ME
redbullbull 發表於 2009-11-24 19:05

                               
登錄/註冊後可看大圖

你唔聽我電話~!!

只要改你個人

版主o既腰求....我只知道SANWA的M11X可以做到....因佢可用三款唔同o既接收的...你只要買晒佢就可以有三部車用倒一對一的setting喇...可似set到A setting foa A car .....B for B .....C for C.....互不相通的....
補允:三款接收都系2.4G.....

版主o既腰求....我只知道SANWA的M11X可以做到....因佢可用三款唔同o既接收的...你只要買晒佢就可以有三部車用倒一對一的setting喇...可似set到A setting foa A car .....B for B .....C for C.....互不相通的....
補 ...
bigman0712 發表於 2009-11-24 22:08

                               
登錄/註冊後可看大圖

thanks, 我都奇怪成本書我都睇晒, 無理由睇唔明, 原來係無呢個FUNCTION, 下次唯有帶個腦, 唔懶得~ HEHE

我記得應該Spektrum可以將隻接收bind落memory

就算有都係唔實用，因為每車有唔用setting...

就算有都係唔實用，因為每車有唔用setting...
wingwing 發表於 2009-11-25 14:59

                               
登錄/註冊後可看大圖

唔係架, 好多REMOTE有MEMORY記底SETTING

我記得應該Spektrum可以將隻接收bind落memory
雪野男 發表於 2009-11-25 13:20

                               
登錄/註冊後可看大圖

但始終做唔倒指定setting對指定車.....互不相通的....
除SANWA M11X外...重有無其他鎗控能做到版主腰求呢....我都想知...THX

但始終做唔倒指定setting對指定車.....互不相通的....
除SANWA M11X外...重有無其他鎗控能做到版主腰求呢....我都想知...THX
bigman0712 發表於 2009-11-25 22:31

                               
登錄/註冊後可看大圖

唔係喎, DX3R 本說明書講係 bind 落 model memory 而唔只係 bind 落支控度喎

ModelMatch
The DX3R features patent pending ModelMatch
technology that prevents operating a model using the
wrong model memory. During the binding process,
the receiver actually stores the code that is assigned
to the specific model that is currently selected in the
transmitter. For example: if the model that is selected
in the transmitter is model #3, when a receiver is
bound to that transmitter, the receiver will only operate
when model #3 is selected. If another model memory
is selected (model #5 for example) the receiver will
not connect. If model #3 is again selected in the
transmitter, the receiver bound to model #3 will
connect. ModelMatch prevents operating a model
using the wrong model memory.

做到都冇意思....

做到都冇意思....
wingwing 發表於 2009-11-26 09:59

                               
登錄/註冊後可看大圖

咁又唔係話無意思o既, 我自己都層經試過用錯 model memory, 你試諗o下如果你用錯 model memory 而個前後波係 reverse, 又或者左右 reverse, 會有d乜野後果