Gaps between suspension arm & the mounts (toe-in/ out setting)

Dear CHings,

My new TB-03 played less than 2 hrs, only have small crash (about 20% speed of 13T BL motor) to wall on rear wheels.

Gaps were found at both suspension arms (L+R) from the mount for setting toe-in/out. the diameter of the hole on the mount seems enlarged and the suspension arm can slightly move forward and backward about 1mm.

What should i do?

replace the mount to aluminum alloy type?
add a thin ring to fill the gap?

Thanks!
P.S. Sorry! I don't know Chinese typing, but I can read.

試下用介子zip下佢

可以加spacer攝
一係就換左佢做Alu.
但係媽星野成100一隻,都係要攝spacer

可以加spacer攝
一係就換左佢做Alu.
但係媽星野成100一隻,都係要攝spacer
Noir.KAZE 發表於 1/12/2009 13:07

                               
登錄/註冊後可看大圖

"the diameter of the hole on the mount seems enlarged "
相信要換金屬碼先解決到.....

thanks brothers!

these parts seems too weak!

"the diameter of the hole on the mount seems enlarged "
相信要換金屬碼先解決到.....
lung1 發表於 2009-12-1 13:17

                               
登錄/註冊後可看大圖

眼訓得濟睇唔清楚,thx
咁樣既話就一定係要換新既


我部TB-03玩左10排電個膠既都冇虛,係我嫌佢係膠先換金屬