5T..以下既摩打..有咩選擇?

有無c兄可以比d意見小弟~
我用120a好盈電變~
有咩牌子既好呢?
同埋想問下有咩電變好爆d~

想問問電變lrp sxx($1680)有無得好似好盈咁...有張卡set下野咁嫁?
定係要用電腦黎搞?難唔難搞-.-?"英文好差..
加多句有無d1000$..以下既推薦?

1000$..以下=SP
la

1000$..以下=SP
la
andyQQ 發表於 2010-4-14 21:28

                               
登錄/註冊後可看大圖

大約係咩價位到呢?

大約係咩價位到呢?
chowhim123 發表於 2010-4-14 22:46

                               
登錄/註冊後可看大圖

    8xx

回復 5# chowhim123


    arround 880

不過~~~sp 同 你隻好"型" 120a~~~~係分別唔大ge~~~除左外形~~因為其實sp 係好"型"代工生產ge~~~~硬件應該冇咩分別...軟件大家用的就有d唔同~~~.....而且..其實你隻好"型" 120a 本身已經好好....唔怕得罪講句~~~如果你唔係高手~~~基本上再換邊隻都唔會對你有好大幫助~~~因為就算你換 1600大元的 lrp sxx..or  rs pro.......同目前的好"型" 120a 有感比較(前提係要update 新程序)~~都唔會有質ge區別......................另外一方面~~~lrp x12  呢隻motor 我個人覺得幾好~~~錢多可以買呢隻玩下~~好正gar~~~就係貴左少少(6xx)

不過~~~sp 同 你隻好"型" 120a~~~~係分別唔大ge~~~除左外形~~因為其實sp 係好"型"代工生產ge~~~~硬件應該冇 ...
uchifong 發表於 2010-4-15 10:48

                               
登錄/註冊後可看大圖

   Many people ran into problems running RS Pro with modified motors, I would recommend sticking with your hobbywing. Last weekend, my Speed Passion GT 2.0 Pro ran against SXX TC not much speed difference. I wouldn't recommend LRP X12 mod motors, as they have too much bottom end, I would try Speed passion v2 or v3 if you are just starting out.

sorry......may i ask : what is "too much bottom end"?

sorry......may i ask : what is "too much bottom end"?
uchifong 發表於 2010-4-15 11:31

                               
登錄/註冊後可看大圖

bottom end=頭段. Sorry, computers at school running linux cannot type chinese.

bottom end=頭段. Sorry, computers at school running linux cannot type chinese.
defcone 發表於 2010-4-15 11:35

                               
登錄/註冊後可看大圖

thanks~~~~~~~~~~~~不過~~~bottom end=頭段 ?.按解釋~唔係應該解"尾段"會似d?......咁請問尾段應該點叫呢?

thanks~~~~~~~~~~~~不過~~~bottom end=頭段 ?.按解釋~唔係應該解"尾段"會似d?......咁請問尾段應該點叫 ...
uchifong 發表於 2010-4-15 11:39

                               
登錄/註冊後可看大圖

Top end, haha just terms we use in Australia.

Top end, haha just terms we use in Australia.
defcone 發表於 2010-4-15 11:48

                               
登錄/註冊後可看大圖

    icic~~~~i used to in aus sydney "unsw"~~~~~~but i am not really "柯屎"~~hehe

icic~~~~i used to in aus sydney "unsw"~~~~~~but i am not really "柯屎"~~hehe
uchifong 發表於 2010-4-15 11:52

                               
登錄/註冊後可看大圖

哈哈我宜家就係讀緊果到...yi!!!!師兄喔.

哈哈我宜家就係讀緊果到...yi!!!!師兄喔.
defcone 發表於 2010-4-15 15:47

                               
登錄/註冊後可看大圖

    咁就真係要叫你一聲c弟 lo~~~~~

唔該晒咁多位c兄!!!已經有所理解