兩個幾星期既成績...

用兩個幾星期既時間, finally 攪惦架 Yokomo CGM. 全車鈦縲絲 + ceramic bearing. 多謝老表兄, EDDE哥 同其他師兄既指導. 幾滿意成果. 好快會換埋電線插頭做 Deans T-plug.

暫時呢隻 FD 殼, 等緊隻新既 雨宮FD...

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

好靚呀!~

架舊 Drift Package CM 變成用黎做 racing. 好多精品都換左係架新 CGM 度, 所以好多部份係用番原本膠 或多餘既後備 parts 組成. 全車 Yokomo precision bearings, 前金屬直"濕" + 後 Ball 差, Rayspeed 白彈弓, Sorex 36R 呔... etc
等埋隻 Mazda 6 殼, Spektrum 3500 reciever 同少少 parts 就完工.

宜家用住隻好醜既 F430 先, 佢係我第二隻噴既失敗之作...

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

MONEY!MONEY!MONEY!

原帖由 AMAT 於 2006-8-13 23:24 發表
MONEY!MONEY!MONEY!

唔夠你果"批" Yokomo collection 多 money money money... 哈.

Nice .. i think u didnt accomplish the brushless wiring yet right ?? .  .  . abit too long and massive, u need to do some surgery on that .. BTW.. just curious.. as u said the 2nd CGM is build for race .. just wondering why u change Ti screws onto ur drifter but not this racer.. and also those carbon shock towers .. both should be more appropriate for so called " Racer " instead of drifter .. pls comment and advise ..

原帖由 kawada 於 2006-8-14 01:10 發表
Nice .. i think u didnt accomplish the brushless wiring yet right ?? .  .  . abit too long and massive, u need to do some surgery on that .. BTW.. just curious.. as u said the 2nd CGM is build for  ...

The 2nd is a CM. It is setup for racing but simply for fun and training until I buy my next car, either a T2 or BD. So I will not invest too much into this CM. The main issue is to complete the CGM drifter, so it has all the goodies. Keeping money for the coming racer. Probably a BD because I still have many goodies left over for Yokomo car.

Yes, the GTB wiring has never been touched yet. It will be done sooner or later. The long wires really bother me.

[ 本帖最後由 hkopium 於 2006-8-14 01:36 編輯 ]

GOOD!!!!

I am waiting to drift with u.......

wow....great machine !!  change to banana plug la, I think is look more tidy than T- plug.

and next time u don't add  哥  beside my name na, is not suitable for me, hehe....

好掂唷~~好有戰鬥力~!
唔知幾時可以再同你地呢班高手學玩漂移呢??~~

威廉兄...yokomo SD ceramic bearing set....$1000??

原帖由 RC-DRIFTER 於 2006-8-14 10:57 發表
威廉兄...yokomo SD ceramic bearing set....$1000??

wawawa.........

老表: 唔洗, 比左個靚價我, 但唔記得幾多錢, 連埋一堆其他野買, 都係一千有找.

宏: 你咪玩我啦.

EDDE: Banana plugs needs 焊接, 所以一直未整... 我今日 call 你就係想你 post D 你用既 banana plug 既近鏡照片做版, 學下焊邊個位 (battery 同 ESC 電線都). 如果你方便既話.

[ 本帖最後由 hkopium 於 2006-8-14 20:55 編輯 ]

hkopium ~ sorry for late post............

                               
登錄/註冊後可看大圖

                          
                   ~  this motor plug shorter than batt plug  ~  

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

原帖由 hkopium 於 2006-8-13 23:14 發表
用兩個幾星期既時間, finally 攪惦架 Yokomo CGM. 全車鈦縲絲 + ceramic bearing. 多謝老表兄, EDDE哥 同其他師兄既指導. 幾滿意成果. 好快會換埋電線插頭做 Deans T-plug.

暫時呢隻 FD 殼, 等緊隻新既 雨宮FD ...

i want to know where did u get yr silver sitcker?
thx

Vinz: The sticker is bought from Japan.

EDDE: Thank you!!! But I forgot to buy more banana plug today... Not eough...

原帖由 hkopium 於 2006-8-16 19:21 發表
Vinz: The sticker is bought from Japan.

EDDE: Thank you!!! But I forgot to buy more banana plug today... Not eough...

ooo
how much is it ?

hkopium 兄,會唔會玩o黎緊27號,偉高搞的飄移比賽?

Vinz: 好似 1,600 yen. Not sure, long time ago.

c9 哥仔: 去一定去, 手車太雞, 可能拍下片, 做 camera man 算... 仲有一項好重要既任務... "gup" 女 , Yokomo 個 showgirl 好正, 我見到.

[ 本帖最後由 hkopium 於 2006-8-16 21:06 編輯 ]

原帖由 hkopium 於 2006-8-16 21:05 發表
Vinz: 好似 1,600 yen. Not sure, long time ago.

c9 哥仔: 去一定去, 手車太雞, 可能拍下片, 做 camera man 算... 仲有一項好重要既任務... "gup" 女 , Yokomo 個 showgirl 好正, 我見到.

我好想玩,可惜我冇yokomo