Speed Passion ESC GT 2.0 or ver. 2.1? 請問Function差得遠嗎？

請問如果係平時玩車用 ESC， 請問買邊隻 Version (2 or 2.1) 化算Ｄ呢？
Function差得遠嗎？
Ver.2.0 ($680) or 2.1 ($850)?
thanks!

Ver 2.0 有兩款，分別是 LPF版 和 Pro版。 $680 是 LPF版， 摩打 support 低至 5.5T。 Pro版 摩打 support 至 3.5T， 屬競賽級電變 (約HK$8xx)。 Ver 2.1 是較新款的 ProStock 電變，摩打 support 低至 9.5T，專為 Stock 賽事而設。
如果你的預算是 HK$8xx，Pro版 電變是較合適的選擇，因為它對摩打的兼容性較大，日後 upgrade 也無須換電變。

Both  2.1 and 2.o pro are good and basically the same. The major different is the firmware pre-loaded, case, and accessories which come with. For me I will go version 2.1.  It has bigger cooling fan, whole upper case made of aluminum, and pre-load with stock mode firmware. Buy a program card you can easily switch the fore and back btw modify and stock.

請問隻version 2.1用modify mode可頂到幾turn呢

回復 4# gordonleung

Same as 2.0 pro, 3.5t

有無ching知 sp 2.1 pro版幾時出???同埋係咪有turbo mode?

回復 3# shungyan


    I am using sp 2.1 prostock with (100528mod) software with 4.5 turn SP V2 motor with gear ratio 8.9. It work fine so far with 8 minutes run in TRC, it's degree around 62 on esc and 52 on motor. I try 4 turn sp v2 motor with 9.7 gear ratio and esc overheat when I hit full throttle.

回復  shungyan


    I am using sp 2.1 prostock with (100528mod) software with 4.5 turn SP V2 mo ...
arfatt 發表於 2010-8-11 12:15

                               
登錄/註冊後可看大圖

Thanks for report.
What is your setting on option#9 (AMTS-Timing) when your 4.0T thermal?

回復 5# shungyan

Thank you ching!

幾時出就唔知 係有turbo mode 我是用家之1

回復  shungyan


    I am using sp 2.1 prostock with (100528mod) software with 4.5 turn SP V2 mo ...
arfatt 發表於 2010-8-11 12:15

                               
登錄/註冊後可看大圖

    Isn't SP 2.1 Prostock is limited to 8.5 t or above? playing 4.5 t??

回復 11# buzzybee82

Heard that SP is writing a program/firmware to allow 2.0/2.1 to run turbo boost for Modified (low turn motors)

回復  buzzybee82

Heard that SP is writing a program/firmware to allow 2.0/2.1 to run turbo boost ...
shungyan 發表於 12/8/2010 11:00 AM

                               
登錄/註冊後可看大圖

    已經有啦~ 528 firmware

回復  buzzybee82

Heard that SP is writing a program/firmware to allow 2.0/2.1 to run turbo boost ...
shungyan 發表於 2010-8-12 11:00

                               
登錄/註冊後可看大圖

But still, can the prostock esc use 4.5t just as above ching said? Won't it be overheated?

I'm waiting the 2.1 pro version to launch, shop said it should arrive mid aug

回復 13# lung1

That's great. Ching, do you know where to get the suggested setup for 4.5t?? Thanks a lot!

回復  lung1

That's great. Ching, do you know where to get the suggested setup for 4.5t?? Thanks  ...
shungyan 發表於 2010-8-12 17:05

                               
登錄/註冊後可看大圖

There is one on the Speed passion's website.

I haven't seen any track long enough to use turbo, so 205_g is enough.

DRRS 3-4, AMTS: max or 1 below.
FDR:8.6-8.2

回復 14# buzzybee82


    I am using 2.1 prostock in TRC with software (100528mod) with 8.9 gear ratio with 4.5T SP V2 motor. In 6 minutes run it's degree around 60 on esc and 50 on motor. The esc setting is
1:1
2:2
3:3
4:6
5:3
6:1
7:1
8:1
9:1
10:1
11:1
12:2(turbo rpm)
13:9(turbo start at 15000 full throttle)
14:3(turbo delay 0.3 seconds when full thorttle)
15:3(turbo punch -2)

回復 8# hardmankam


    When I use 4T sp v2 motor my setting on #9 is 1 (AMTS-TIMING is 0) and my gear ratio is 9.7 with software (100528mod). My friend is using hobbywing v2 120a esc with LRP x12 4T same setting have no problem at all.

回復  buzzybee82


    I am using 2.1 prostock in TRC with software (100528mod) with 8.9 gear ra ...
arfatt 發表於 13/8/2010 11:58 AM

                               
登錄/註冊後可看大圖

請問ching 用左turbo mode 之後/之前 laptime 分別是多少......?

轉左turbo 時間有無快到...? 操控方面又有咩唔同左....?
TRC 條直路襟短, 有用嗎.....?