請教買啤令

除左kws外, 我睇左d post,以下呢間野都有得買....

九龍軸承公司
Kowloon Bearing Co.
http://www.ktb.com.hk/contactus.html

但睇佢個網頁, 真係好多牌子, 好多款, 用係 rc car 上, 應該用邊款比較好d 呢?
仲有, 唔知係呢間野買係唔係平過kws 呢?

我玩 ta-05
many thx

Price is just a bit less than kws

I usually go to 新界啤呤, this shop would entertain you even less than $10.

九龍軸承公司 will charge a surcharge (can't remember how much, should more than $10) if you spend less then $100. In addition, their staff members are not professional enough (my personal feeling) and always show no response

立泰軸承,價錢合理,好老實
唔需要買满一百元嘢,

kws 買都係5$粒

回復 4# lung1


    大陸造嘛

回復  lung1


    大陸造嘛
chacha 發表於 2010-9-27 23:18

                               
登錄/註冊後可看大圖

乜吾係所有的「啤鈴」都係大陸造咩?

去邊度買都一樣咖啦、吾係咩?

lap 帶軸承
試過買2粒10x15要接近40蚊

去身界介bearing好過啦

回復 6# f-16

表達有小小問題
應該係話大陸牌子，如果買外國牌子，質量會比較好

乜吾係所有的「啤鈴」都係大陸造咩?

去邊度買都一樣咖啦、吾係咩?
f-16 發表於 2010-9-27 23:37

                               
登錄/註冊後可看大圖

    都有日本做 不過好貴咁解
德國既更加唔洗講野

SKF bearings are very high quality, alot of industrial applications are using SKF bearings.