Servo for SC18 ( 或者RC18T2 )

gimsink · 發表於 2011-4-28 22:57:58

遊客登錄

您需要登錄才可以下載或查看，沒有帳號？新玩家註冊

x

有冇師兄可以指導一吓, 有邊隻 servo 可以用在 SC18 (或者RC18T2 )上, 一定要啱位, 否則上面舊 mounting 膠裝唔落....

登錄/註冊後可看大圖

pma · 發表於 2011-5-9 15:56:29

You may check servo database (www.servodatabase.com) for details dimension.

pma · 發表於 2011-5-9 16:04:47

回復 gimsink 的帖子

I also face same problem before.
I bought a hop-up mount but it can't fit exiting servo.

Two way I could choice, 1. forget the new mount 2. buy a new servo that fit the new mount.
However, another issues was found - connector size and torque.
Normally, I can select 9g servo but it seems that connector size is difference and torque
is not enough. Finally, I give it up.

gimsink · 發表於 2011-5-9 23:13:30

最后用十蚊買左把三再角銼, 將 servo mount 兩邊銼到 fit 位, 免強裝倒. 然后发覺個 servo saver 吸唔入, 死死氣去外國網站訂套原廠 servo saver, 計埋运費成百蚊, 死味 ! 如果再有野坏就 Dump 七左架 SC18 仔 !

pma · 發表於 2011-5-10 00:05:06

I already gave up my RC18T and return to 1:10 off road.

lcpvcce · 發表於 2011-5-10 12:41:10

本帖最後由 lcpvcce 於 2011-5-13 10:40 編輯

I used this one SANWA ......................

gimsink · 發表於 2011-5-10 22:52:21

師兄你個servo mount 同埋底板係原裝定係補品 ? 边度買 ?

lcpvcce · 發表於 2011-5-10 22:59:48

Ching I m new hand also ................Chassis and motor mounting were made by associated team factory and regarding servo mount from ebay.

pma · 發表於 2011-5-10 23:57:54

回復 lcpvcce 的帖子

Where can buy the wheel adaptor? Thanks.

lcpvcce · 發表於 2011-5-11 20:13:48

回復 pma 的帖子

KWS.........

pma · 發表於 2011-5-11 22:16:02

Red Star??

		自動登錄	找回密碼
密碼			新玩家註冊