Mr-03 問題

1. 請問Mini-z 的Mr-03 係唔係咩車殼都用得, 如MM, MR, LM, RM, 定係要自己買野去改?
2. 如果買Mr03, 4PK 果d控係唔係加個2.4 module 就得, 定要再加其他野, 謝謝

1.  MR-03 can be use MM, RM, LM but no MR.  The major different is the motor mount.  Player need to change the motor mount to fit the body.  Check this link:
http://www.kyosho.com/eng/produc ... l?product_id=105671
2.  Futaba 4PK is build-in Futaba 2.4GHz system, it is no connector for module.  Someone do the internal modification on 4PK for Mini-Z.

By the way, do you know what you want to know?  If not, go to the TRACK and see what you need...

Thank you
因為最近小弟想入番架MR03 玩, 加入Mini-Z 大軍, 我見出面有2個版, 一個係普通版, 另一個係紅色版
如果買紅色版果個洗唔洗買bearing ga?
如果買控, 可唔可以用3PKS, 因小弟唔知3PKS 有無內置2.4G, 定3PK 先得?

謝謝

The Boss of hobby shop can help you.

CAN USE KO EX-10/EX-1

3pk can not be used

Thank you
因為最近小弟想入番架MR03 玩, 加入Mini-Z 大軍, 我見出面有2個版, 一個係普通版, 另一個係紅色 ...
Sinly 發表於 2011-3-28 15:56

                               
登錄/註冊後可看大圖

If you haven't any remote control and need to buy the new one, buy KO-EX1 or EX-10, cos its no need to modification the module and it can directly install the KO 2.4G module.

1. 請問Mini-z 的Mr-03 係唔係咩車殼都用得, 如MM, MR, LM, RM, 定係要自己買野去改?
2. 如果買Mr03, 4PK  ...
Sinly 發表於 2011-3-24 17:39

                               
登錄/註冊後可看大圖

Ching你D問題太多了,簡單D去買左部車先,再買支ko EX5ASF就玩得,如果你左改又改只是晒錢的,玩落去識下才改動你的車啦!

Ching你D問題太多了,簡單D去買左部車先,再買支ko EX5ASF就玩得,如果你左改又改只是晒錢的,玩落去識下才改 ...
kambox808 發表於 2011-3-28 18:53

                               
登錄/註冊後可看大圖

認同, 買個車架, 跟住買自己鐘意既殼, 問埋模型鋪老細配咩off set 既軨同呔, 珠差同摩打座加查查, t-板.....等, 玩左先再諗其他.

控, 無budget 就PERFEX KT-18, 想多d setting 咪ko EX5ASF, 再多d 咪ex-1 or ex-10.

玩到唔夠玩先換option 件都未遲

好的, 多謝各位ching 的意見

紅色果個版本好似已經改左好多野啦喎！不如試左車至算啦。

紅色版本比較到位值得推介

上車場問下C hing, 佢地d意見會幫你慳返好多$又玩得開心