Kyosho TF5s photo gallery

登錄/註冊後可看大圖

i like Kyosho, too.

Kyosho used to very good, but less and less spare parts in the market these days.

真的唔Ng多而且偏貴，幸好市面上有代用零件但要訂.

Kyosho平跑真係幾罕見

回復 5# hkwcc00

TF5s is not a very strong car.  As mentioned previously the plastic tub was broken and this happened only after a few rounds at JV due to my newbie driving style.

The Lexus SC430 body is quite nice however.   

I was going to buy EP Fazer last year but all KWS shops ran out of stock at the time.  Hung Sing boss suggested that I should go for this.   I should have waited....

Anyway, I don't want to waste this car and hence got the 3Racing part.  I hope the new carbon chassis will be able to give this car a second life.   hehe.

睇個樣好似幾得下咁喎。

應該都跑得下

Almost done.  Most of the electronics are now in place.  Just missing a new receiver.

登錄/註冊後可看大圖

請問零件難唔難買呀 ? 師兄

回復 10# BigCat
Dear BigCat,

I find that Kyosho parts for TF5s are not commonly available in KWS shops.  If you don't insist on original parts from Kyosho, you can use replacement parts from various after market suppliers such as 3 Racing etc.  
For example, my carbon chassis, upper deck and motor mount are from 3 Racing; rear universal drive shafts are the same ones as my Sakura Zero etc.
For items such as suspension arms, I have to use Kyosho original parts and I got them from "Hung Sing".

Also you may not be able to obtain advice easily as most c-hings are unfamiliar with this car.  You may need to explore and compare on your own for a better understanding of its maintenance.  On the other hand, Kyosho instruction manual is easy to read and comprehensive with lots of details.

This was my first EP touring car and I only play it a few times before switching over to Zero.  Shaft driven car is fun to drive and is the reason why I restore it.

http://hk.3racing.hk/products_li ... 6&x=21&y=12

請問呢部TF5s賣緊幾錢呢?thx~

回復 13# 123
It was HK$1480 at Red Star (last November).  All plastic parts.
http://www.kyosho.com/jpn/products/rc/detail.html?product_id=104161

回復  123
It was HK$1480 at Red Star (last November).  All plastic parts.
wiggles 發表於 2011-3-31 23:52

                               
登錄/註冊後可看大圖

    炭仟低版是自己改?

炭仟低版是自己改?
123 發表於 2011-4-1 00:14

                               
登錄/註冊後可看大圖

CHing,


好似一樓講咗係3Racing喎。  

CHing,


好似一樓講咗係3Racing喎。
LoFi 發表於 2011-4-1 00:21

                               
登錄/註冊後可看大圖

    係喎!THX~THX~

Installed anti-roll bars using Top Sabre kits with some minor modifications.

Front:

登錄/註冊後可看大圖

Installed new steering and servo saver.  Repositioned servo.

登錄/註冊後可看大圖

可以落塲啦