LRP 2in1

我想請問這舊東西是怎樣用的? LRP 2in1 LiPo Guard + BEC

回復 twa11 的帖子

變速同舊電既平衡插就插落佢度，佢條野就插落個接收度，當舊電放到電壓第於一定值時，佢就同你鎖油門。

li-po cut??

thanks ching,是不是規定7.4v?若果將 lipo電插入lrp 2in1,然後它插入接收,减壓當接收電用得嗎?

twa11 發表於 2011-8-31 08:33

                               
登錄/註冊後可看大圖

thanks ching,是不是規定7.4v?若果將 lipo電插入lrp 2in1,然後它插入接收,减壓當接收電用得嗎?

"The 2in1 LiPo guard+BEC makes every brushless and brushed speed control useable for LiPo batteries. During operation the 2in1 LiPo Guard+BEC monitors at all time the LiPo batteries, so they never get too low discharged. In addition the LiPo Guard also features a strong 6V/5A BEC.

The built-in BEC in speed controls is mostly to weak and is not designed for high input voltage, such as 3S or 4S. That’s where the 2in1 LiPo Guard+BEC comes into play and does all the work!
"

defcone ching 可唔可以用中文解釋一下,因為小弟英文是有限公司

可以用到4S差入呢個2in1, 佢會減壓到6V俾個接收用.

唔該哂 defcone 師兄

(電壓第於一定值時，佢就同你鎖油門) ??? 都係唔太明佢嘅作用?

Disc 發表於 2011-9-1 00:57

                               
登錄/註冊後可看大圖

(電壓第於一定值時，佢就同你鎖油門) ??? 都係唔太明佢嘅作用?

佢系一個lipo cut, 當你玩到牌電每cell 3v(左右), 佢就會cut.

明白晒喇, thx defcone 兄 !

如果可以减少油门好d,即时cut容易引起车祸,其实电变也有降压cut电功能,五知道点解还要用这个...