$$$$$??thx作者: macau-rc 時間: 2012-4-24 09:28
CRC......................作者: rcrr 時間: 2012-4-24 10:21
serpent S120LT or yokomo R12 作者: william.haha 時間: 2012-4-24 10:47
Top is good and 13/f have all parts作者: sepsep 時間: 2012-4-24 11:16
如果唔介意...
. 膠件比較起其它牌子的QC無禁精準
. 要買過一套美制手批(跟盒有一套六角匙送)
. 配美制螺絲比較麻煩,一般五金唔會有
. 香港得一店賣零件
. 要預留金錢買一些保品
以上都不是問題就可以考慮買CRC. 作者: POLO-GTI 時間: 2012-4-28 11:52
請問CRC有什麼優點？作者: AVO 時間: 2012-6-11 13:37
serpent S120LT 作者: svsv 時間: 2012-6-12 10:35
想十幾年後仲玩得買到配件，買孖星作者: ken6159 時間: 2012-6-12 17:37
Team Associated or Yokomo作者: vash 時間: 2012-6-12 23:16
Team Associated RC12系列是幾十年來的可靠之選。即使古舊型號的parts 也可以找到。作者: cyberkohk 時間: 2012-6-13 17:33
serpent S120LT 咩價位? 作者: ernestf 時間: 2012-6-13 19:07
I am running 4 1/12 and here is my 2 cents on them :
(1) Xray X12 - high grade ball bearings and build quality, car is slightly too stable in my opinion but proper setup might help to improve steering aggressiveness.
(2) R12 - great design, very reliable and consistent performance, need Yokomo specific tires / rims (rear rims offset are different). A good choice if you have loads of $$ and can wait for parts / tires supply.
(3) S120LT - some ball bearings died in my initial few packs, replaced them with higher grade ball bearings will resolve the issue. So far my faster pan car in the local track (I ran in Singapore) in term of single best lap and overall 8mins laptime.
(4) 12R5.1 Lipo version - QA quality is not impressive at all, since my TC6 and 12R5.1, at least 2 parts per car are not in correct size or with defects. Car handling is not bad tho.
Beside the chassis, I also opt for Hobbywing 1S ESC over LRP SXX v2 ;)
