RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 5053|回復: 19
打印 上一主題 下一主題
收起左側

Tamiya SRB (Rough rider) highly modified

  [複製鏈接]
跳轉到指定樓層
1#
tiger1 發表於 2012-7-15 22:46:17 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 tiger1 於 2012-7-23 17:35 編輯

This one was an SRB Rough rider I got back in 1998 as a new built model. Then I added a custom chassis 3mm sandwich carbon fiber (super stiff), RCH front suspension arms, MIP trailing rear arms with its very rare CVDs/shafts, Thorp differential, machined down tranny, widened front end using carbon fibre tubes, mini servo with metal gears from Germany, mini receiver, JG roll cage, Yokomo titanium turnbuckles, MRP body, CRP wing,CRP bumper, RC10 battery cups, custom made rear gearbox underprotector, cut down dirt burner wing, Kyosho optima series motor slipper clutch bell   ......
2#
rcworldhk 發表於 2012-7-15 23:03:59 | 只看該作者
3#
cfchung 發表於 2012-7-15 23:05:34 | 只看該作者
and nice option parts!
4#
cfchung 發表於 2012-7-15 23:11:32 | 只看該作者
But I wonder that the rear arms are strong enough??
5#
v8yw2 發表於 2012-7-16 00:50:39 | 只看該作者
cool 我喜歡後懸吊
6#
 樓主| tiger1 發表於 2012-7-16 06:31:19 | 只看該作者
cfchung 發表於 2012-7-15 23:11
But I wonder that the rear arms are strong enough??

These MIP arms are never known for strength, as a matter of fact, most trailing arm designs are not known for strength. Therefore I used custom 3mm carbon plate rather than the original FRP.
7#
 樓主| tiger1 發表於 2012-7-16 06:31:57 | 只看該作者
v8yw2 發表於 2012-7-16 00:50
cool 我喜歡後懸吊

Me too I especially like the rear shafts, very very unique, never to be seen in RC after
8#
rodmanwing 發表於 2012-7-17 17:59:25 | 只看該作者
so good
9#
hihizaza 發表於 2012-7-17 20:58:52 | 只看該作者
條萬向好古怪喎!比近鏡睇睇
10#
fat_fat_cat 發表於 2012-7-17 22:44:58 | 只看該作者
hihizaza 發表於 2012-7-17 20:58
條萬向好古怪喎!比近鏡睇睇

just a fiber disc, we still use a lot in industries purpose, but no in hobby any more.
11#
fat_fat_cat 發表於 2012-7-17 22:49:41 | 只看該作者
12#
 樓主| tiger1 發表於 2012-7-17 23:03:23 | 只看該作者
fat_fat_cat 發表於 2012-7-17 22:44
just a fiber disc, we still use a lot in industries purpose, but no in hobby any more.

can you show a similar industrial sample? What is the application??
13#
 樓主| tiger1 發表於 2012-7-17 23:03:54 | 只看該作者
車臂是 RCH
14#
fat_fat_cat 發表於 2012-7-17 23:14:00 | 只看該作者
just connect to a motor to anti vibration

i will try to found a pix later
15#
 樓主| tiger1 發表於 2012-7-18 00:32:36 | 只看該作者
RCH 乃差不多三十年老嘢,執咗好耐,至少二十年啦。
16#
fat_fat_cat 發表於 2012-7-18 01:04:33 | 只看該作者
17#
 樓主| tiger1 發表於 2012-7-18 07:05:02 | 只看該作者
thanks for the photo
18#
lcpvcce 發表於 2012-7-23 17:28:47 | 只看該作者
Jealous is not the word!! ...................
19#
 樓主| tiger1 發表於 2012-7-23 17:34:28 | 只看該作者
師兄客氣鳥
20#
exo_oni 發表於 2012-7-24 13:16:19 | 只看該作者
好令人懷念的RC呀 THX!
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-12-25 15:53 , Processed in 0.163819 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表